Farmer joe
Member Since: 10 Sep 2020
Location: Dungannon
Posts: 46
  
|
2.7 tdv6, while checking compression at the injector holes I’m getting just less than 9 bar on cylinders 1,2 and 4, cylinder number 5 I’m getting 8 bar, I haven’t been able to get the tester onto cylinders 3 & 6 as the bulk head gets in the way. What pressure should these engines be putting up? Thanks. [/i]
|
 1st Apr 2021 9:29 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
 
|
No idea on pressures, but most modern stuff is tested using the diag kit and the starter motor, basically so long as they are much the same then it is good to go.
Done a few trucks this way.
There is a good vid by Jas lr showing you the test, though I think he uses a scope rather than the diag kit.
What are you trying to find?
|
| 2nd Apr 2021 6:47 am |
|
|
