discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 735
|
Is it possible to set the ride height lower than it may be sat now please? My car has seemingly a good gap between top of tyre and rim. When I lower it to allow the dogs an easier jump it doesn’t appear as low as my old D3 went at access height? I wondered if this car was somehow set higher? Discovery 3 tdv6 HSE 2007
Alfa GTV CUP
Alfa 156 JTS
Alfa Spider TS
Alfa GT Cloverleaf
Volvo XC70
|
1st Jul 2019 6:49 pm |
|
|
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
|
You can configure the suspension height using the IID tool. Be aware though, that changes make a difference to all ride heights.
For example if you lower access mode by 10mm, standard and off road modes will also be 10mm lower. Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
|
1st Jul 2019 7:05 pm |
|
|
discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 735
|
That would work perfect for me.
What amount of height adjustment is possible please? Discovery 3 tdv6 HSE 2007
Alfa GTV CUP
Alfa 156 JTS
Alfa Spider TS
Alfa GT Cloverleaf
Volvo XC70
|
1st Jul 2019 8:52 pm |
|
|
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
|
It's not exactly defined by GAP for the Disco3, but take a look here and that should give you an idea:
https://www.gap-diagnostic.com/faq-items/w...-addition/ Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
|
1st Jul 2019 11:11 pm |
|
|