Member Since: 06 May 2019
Location: Doncaster
Posts: 2
Fitting fog light bumper to none fog
Hi all.
New owner of a 2006 discovery 3 and wanting to fit a front bumper with fog lights to mine which hasn't got fogs, any advice for looms or is it possible.
Regards Aaron.
6th May 2019 8:12 pm
Mole734
Member Since: 12 Aug 2016
Location: Derbyshire
Posts: 161
Member Since: 06 May 2019
Location: Doncaster
Posts: 2
Much appreciated thankyou.
6th May 2019 8:20 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
First job is to check you have the loom plug behind the headlight, think it was drivers side, because if you haven't, it's a hell of a job but you should have it.
Looks like this:
Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
6th May 2019 8:23 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10628
3 thick wires below drivers headlight.
WOuld have though it was there.
Wouldn't say it was a hell of a job without it.
Oh and you need to change the headlight switch.
Get the correct one. e,g auto headlights or not.
Headlight level adjustment or not.
6th May 2019 8:55 pm
Steamyrotter
Member Since: 03 Jul 2017
Location: Somewhere near Somewhere else in Somerset
Posts: 117
Can't you just get the parts to fit to your bumper rather than change the lot?
Soz.. saw it in post 2.... If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking .. O
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum