Disco4Landmark
Member Since: 14 Jun 2017
Location: Bedfordshire
Posts: 22
  
|
| Screen and Audio just stopped working |
|
Strange one, i was adjusting my electric seat and felt the lumber support button and forgot i had it so pressed it to give it a go, and basically the audio stopped and the entertainment/nav screen just turned off. The power button wasn't bringing it back either. Then i noticed that the electric window controls weren't working on the drivers door, but they were on the passengers and all windows worked when using the remote lock/unlock button.
Has anything like this happened before? Could it just be a fuse that's blown? Seems strange that all this happened as soon as i tried to adjust the lumber support button, which probably hasn't been used in 2 years or so.
Any suggestions would be greatly received
|
 18th Apr 2019 8:16 am |
|
|
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1072
|
As well as checking fuses etc. I would check under the seat and make sure you have not accidentally 'scissored' through a wiring loom.
The coincidence of moving the seat at the same time warrants a look underneath.
Good luck  "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything 
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
|
| 18th Apr 2019 10:52 am |
|
|
Disco4Landmark
Member Since: 14 Jun 2017
Location: Bedfordshire
Posts: 22
|
Thought i'd update you, was just the fuse in the end. I daren't touch the lumber support button again!
|
| 25th Apr 2019 10:45 am |
|
|
