Member Since: 03 Dec 2016
Location: Avesta
Posts: 61
Switch thermotop v for vevo?
Is it possible to buy random vevo and move circuitboard from my
old V and get it working. I found a vevo for just 230£ only a few year and very low miles
at a car breaker.
4th Nov 2019 8:31 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73085
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
4th Nov 2019 11:26 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73085
Didn’t think to Google.
4th Nov 2019 11:34 am
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2815
Considering the OPs location, he probably knows more about these things than us on our warm(ish) little Island.
Nasher.Heaven doesn't want me, and hell is afraid I'll take over.
4th Nov 2019 11:39 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Re: Switch thermotop v for vevo?
dieseltomten wrote:
Is it possible to buy random vevo and move circuitboard from my
old V and get it working.
i use to sell parkingheaters, mainly webasto.
although i did end that business 10 years ago, i still have some knowledge
The diesel FBH from webasto used to have hardware differences within a certain model.
i do know that the Thermo Top V had versions WITH & WITHOUT fuel preheating
so even within that model range you have differences, let alone the newer models..
the software "sees" components, and if wrong/changed/different specs/ not available, etc.. it will simply not work
if you buy a random unit.. the chance is very big that the hardware is different.. 230 GBP is not that cheap for a used one... to make mistakes.. or throw it in the bin...
other question, why? they make not much difference in performance and do not really wear...
the only bad thing you can do to them is make very short use of them... (going to the shop 1 or 2 mile further down the road below 7 degrees celsius and they pollute and become clogged)
they have to burn for minimum of 10 minutes and then last for years...
short rides? make a switch between the temperature sensor of the FBH (not sure on disco's if the webasto's have their own, normally they do... i have my disco D3 only since 4 days did not look to it yet) en switch it offBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
4th Nov 2019 2:19 pm
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2815
£230 is actually quite a lot(here in the UK) for a used FBH.
Perhaps somebody here can help this chap and send him a known good one for a lot less.
I sold my spare recently with all my old D3 stuff, if I remeber correctly it went for @£100
Nasher.Heaven doesn't want me, and hell is afraid I'll take over.
4th Nov 2019 3:55 pm
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
Buy a new burner instead. I got hands on a complete V EVO, and tried to convert mine. Didn't get it to burn properly. It started up, but stopped after few minutes. Don't remember the fault it trew out. But I gave up. Bought a new burner from AF instead.
Member Since: 06 Apr 2015
Location: Kolding
Posts: 45
I have changed my thermo top 5 to an vevo in my discovery 3 a few years ago..
All you need is to change circuit board and the plugs..
Mine has been running for a few winters..
The vevo is more quiet also than the thermo top 5
I have a brand new vevo on my shelf, it's made for a range rover evoque, so you also need to change board on that..
I want 300€ plus shipping, if you want a new instead of a used
5th Nov 2019 12:06 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Sorry to interrupt..., it can work..... but “a” thermotop v or evo or vevo... they are NOT default the same!
Even not on hardware....
I can not say it enough... when I had a shop in parking heaters, I had hundreds, really hundreds op people who bought random stuff everywere for a lot of money,and then become confronted with the fact that it or parts were/ was NOT interchangeable...
So again, I CAN work.... but also can NOT work.. just beware...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
5th Nov 2019 8:56 am
Fyfasan
Member Since: 06 Apr 2015
Location: Kolding
Posts: 45
I have heard the same if you take a random one..
but I know the vevo that comes from the range rover evoque, works if you change the board and plugs
Also need to change the in/out for water, as they are smaller hoses on the evoque..
Did it on my discovery 3..
5th Nov 2019 9:22 am
sierracossie
Member Since: 22 Nov 2023
Location: Norway
Posts: 1
Fyfasan wrote:
I have changed my thermo top 5 to an vevo in my discovery 3 a few years ago..
All you need is to change circuit board and the plugs..
Mine has been running for a few winters..
The vevo is more quiet also than the thermo top 5
I have a brand new vevo on my shelf, it's made for a range rover evoque, so you also need to change board on that..
I want 300€ plus shipping, if you want a new instead of a used
I am very interested in a quick guide to how you did this.
I am so tired of buying new burners, glow plugs or to the FBH.
I was hoping the Thermo top Vevo could be better for the job.
I see that the pinout on the X1 connector (8wire pin) is a bit different.
Did you just wire them to the matching number to get everything working as on the TT-V?
When you say plugs. Do you mean the water in/Outlets?
It seems like it is the same FBH but with small differences on the pinout.
What board did you change?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum