reitsma
Member Since: 03 Feb 2011
Location: skien
Posts: 138
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
I was unfortunate to reverse in to my garage door yesterday and got a big dent on the top left side at the back panel above the tail lights.
Can this explain that my reversing light is working at the same time as my blinkers? It is the same for both sides or is this coincidental?
Where should I be looking to diagnose a possible ground problem? www.skienklinikk.no
|
17th Jan 2018 9:29 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1791
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 4.0 V6 Petrol SE Auto Java Black 2007 Discovery 3 4.0 V6 Petrol SE Auto Java Black](../images/veh/java_black.gif)
|
There is a lot of wires go down the LH side and if you have a tow bar and electrics there is a fuse panel in there as well. Blinkers/reverse lights go down and along the side of the car so unless a mod has been done it should not be affected. Pull the internal panel and look inside. Remove the whole rear light assembly and check connector and wiring.
|
19th Jan 2018 8:24 am |
|
|
reitsma
Member Since: 03 Feb 2011
Location: skien
Posts: 138
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver 2005 Discovery 3 TDV6 Base 7 Seat Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Loose connector, quick fix www.skienklinikk.no
|
20th Jan 2018 6:09 pm |
|
|