You have 2 gear ratio faults, and most certainly the cause of your issues
These faults can be caused by a badly worn torque converter,
Interesting. As I didn't have any cattle grid effect I assumed the TC was ok. But it can cause incorrect ratio too ?
If the lock up on the torque converter is not working properly and slipping a bit it can affect the calculations in the actual gears. It may not be slipping enough when in gear to actually trigger the converter slip DTC.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
17th Dec 2017 8:31 pm
Sloppy
Member Since: 17 Jul 2013
Location: North Yorkshire
Posts: 142
people often put 'dr tranny' in with grearbox oil changes 'for good measure' or to cure slipping torque converters this dyes the whole oil red.
to be fair its actually good at prolonging torque converter life if the begin to slip
Last edited by Sloppy on 17th Dec 2017 8:40 pm. Edited 1 time in total
17th Dec 2017 8:40 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6755
lynalldiscovery wrote:
Read recent post where the correct spec oil can be red, cant remember who made it but someone checked the spec and it was right.
At least I dared to fully flush my transmission with red colored ATF, so ~ 10 L brown old fluid was exchanged for ~10 L new fluid. Approx. 6600 km later I’m still truckin’ and have no complaints whatsoever.
The manufacturer, BG, lists theirs to be equivalent or exceed the specifications for ZF Lifeguard 6 and a bunch of LR product codes.
Member Since: 16 Dec 2017
Location: leicester
Posts: 4
Hi all it was actually the gearbox at fault i brought a gearbox with tc the only problem i have now is the tc the one they sent was knackered and is slipping i am getting all gears and is driving okay in 4/5/6 unlike before the box i took out looked like it had been reconditioned and look really clean the tc had been reconditioned as well is they any way i can test this as i might reuse this one just dont want to take it all out again to put a faulty one bk in
Thanks happy new year all
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum