Member Since: 19 May 2014
Location: Yorkshire
Posts: 541
Heated Seats: glue for element
What sort of glue should I use to stick a new front seat element to the foam base? I’ve seen plenty of how to threads on this but no one mentions sticky stuff.
18th Nov 2017 7:37 am
Down&Dirty
Member Since: 17 Aug 2012
Location: Somewhere out back
Posts: 1293
A mate used spray glue pretty sure it was 3M 77, stays flexible
But bit of googling may confirm MY24 Defender 90 X-Dynamic HSE
MY18 Disco 5 HSE Santorini Black Now Gone.
New elements have a peel off backing to expose the glue that’s pre-applied. Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
18th Nov 2017 8:32 am
Discologist
Member Since: 19 May 2014
Location: Yorkshire
Posts: 541
Was it difficult to remove the seat covering as i need to replace mine ?The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
18th Nov 2017 11:27 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8228
I would be careful what glue you use, if any it, needs to be inflammable. It can when others can't,
It will when others won't,
It goes where others don't.
It's not too bad a job Mark, recomend new hog rings and hog ring pliers to reassemble
Cheers Greg The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
18th Nov 2017 6:01 pm
Discologist
Member Since: 19 May 2014
Location: Yorkshire
Posts: 541
my life! I’ve fitted the new Elmet and got the cover back on no problem at all but I cannot for the life of me get the last bolt in to hold the pan to the frame.
I’ve tried every combination of the other three bolts in or out but apart fro cross threading the front offside be will not go in. It’s now dark and patience is in seriously short supply.
Take a break and Finnish it tomorrow. It's not going anywhere, you will probably find it goes in easier 👍The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
today 
