Member Since: 16 Sep 2017
Location: East Sussex
Posts: 4
Wheel Rim Load Rating & Will this wheel fit ?
Hello Everyone, my first post
Having just joined the Disco club and bought a 2006 D3 V8 HSE I have been studiously reading many of your posts, which have been of great help (thanks), especially around winter tyres and understanding the sizes/profile/rim size/load rating and speed rating etc
Whilst I was initially going to just change my tyres for the winter and put some 255/55 R19 111 V winter tyres on my current and original rims, then I came upon some Land Rover rims and tyres that had a similar width and profile but were on 18 inch rims and thought (naively) they will do nicely.
However I now from further reading on the forum understand they may not do nicely at all as a) they may not have a circa 940kg load rating needed for the D3 and may not fit the 2006 D3 V8 hub. As I am not sure what Land Rover model the wheels came from or where to find out the load rating, could anyone help please ? I have hopefully put a picture of the wheel below.
Thanks
Simon
16th Sep 2017 3:30 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
They look like D2 rims, I'm pretty sure they won't fit.
D2 or P38 rims. The PCD is the same, however there are differences in offset and also the centre bore diameter.1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
16th Sep 2017 3:52 pm
Rossifume
Member Since: 16 Sep 2017
Location: East Sussex
Posts: 4
Thanks chaps
What are P38 rims ?
Frustrating as I thought I had got myself 5 nice umarked Land Rover 18 inch winter tyre rims for my D3 - with some Michelin summer tyres on them with 5mm left as a bonus.
All part of the learning process I suppose - I'll eBay them and start the search for 19 inch D3 V8 suitable rims for some winter tyres - any ideas where to look ?
16th Sep 2017 5:41 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
P38 = 2nd gen FFRR.
Looks like these D2 rims, I had them on my old D2.
16th Sep 2017 5:44 pm
okennedy
Member Since: 03 Dec 2008
Location: Roscommon
Posts: 138
Member Since: 16 Sep 2017
Location: East Sussex
Posts: 4
Thanks for the links, very helpful, cheers :
17th Sep 2017 1:01 pm
Rossifume
Member Since: 16 Sep 2017
Location: East Sussex
Posts: 4
One more question please chaps - On the 'rims/alloys for the D3' link will the 09MY standard HSE alloys picture shown (from a D4 ?) fit my D3 V8 due to the larger brakes on the V8 ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
