OldPOP
Member Since: 15 Apr 2017
Location: Newbury
Posts: 117
  
|
Ive not had the D3 long and my first fill was to the top and I had a little overflow from somewhere in the wheel arch then last week I had a fuel patch at work on the hottest day so the inner wheel arch came off today to investigate.
I found a 1/4" tube not connected at either end and I guess it links a vent pipe to the drain hole under the flap but I can not see that this has caused the problem - am I missing something?
The only other thing is the steel filler pipe is not anchored at the bracket
|
 1st Jul 2017 8:05 pm |
|
|
BrettKaz
Member Since: 11 Nov 2013
Location: Canberra
Posts: 209
 
|
Try sifting through some body off photos to find which pipes are not connected. I found this
http://www.disco3.co.uk/forum/topic130969.html?highlight=Body+off
Looks to be breather
With this disconnected and the filler not connected it means this car has not been professionally maintained. A bodge job. You should take a good look over the car to check what else is wrong ... Or get a pro to look over it. As a minimum read the posts on cam belt tensioner and make sure your car has the up rated tensioner and is timed properly.
|
| 3rd Jul 2017 3:16 pm |
|
|
