adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
![](templates/vbnew/images/spacer.gif)
|
Have just noticed coolant weeping around the black rubber bung on top of the expansion tank after short journeys - FBH was on both times?
Is this normal - cannot recall noticing beforehand?
Thanks
Adam
|
14th Nov 2007 9:04 am |
|
|
Alex08
Member Since: 09 Nov 2006
Location: Glasgow
Posts: 1600
![](templates/vbnew/images/spacer.gif)
|
Sorry, read this as Coolant Wee page - thought it was a novel form of antifreeze/summer coolant
Oh come on - it is early morning!
|
14th Nov 2007 9:56 am |
|
|
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
![](templates/vbnew/images/spacer.gif)
|
|
14th Nov 2007 10:09 am |
|
|
stapldm
Member Since: 11 Sep 2006
Location: Swine Town
Posts: 2330
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Auto Stornoway Grey 2007 Discovery 3 TDV6 HSE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Adam, happened to mine.
I took off filler cap to release pressure, then unscrewed the small black bung. The coolant drops as the air gets in.
The required tool for the bung is a xB2317 antimagnetic cross-slot screwdriver.
OK, so I made that up; I used a coin
When I took the bung off, there was a small strand of fibre there that just prevented the bung from sealing properly. It looked like a shred of cotton off a cloth. I removed this and re-tightened the bung, replaced the filler cap and had no seeps since.
Oh, the air in the tank below the bung purges itself during your first drive... Dr. Ian Malcolm:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."
Transgenic tomato anyone?
|
14th Nov 2007 1:44 pm |
|
|
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
![](templates/vbnew/images/spacer.gif)
|
I'll try that - thanks
|
14th Nov 2007 1:47 pm |
|
|