Member Since: 02 Aug 2016
Location: North East
Posts: 76
[Wanted] TPMS ECU / Module and Initiators
I have replaced the wheels on my 2010 D4 with brand new Landmark wheels.
They all had TPMS valves fitted including the spare which i bought seperately.
As all wheels have the valves I thought I would retrofit the TPMS system.
I believe I need the control ECU which plugs in near where the fbh remote module lives and the 4 initiators which fit in each wheel arch liner.
Can anyone help me out?
18th Dec 2016 11:43 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Ecu fits up behind the front interior mirrorG4 Gone ...but not forgotten
The works car has TPMS, saved me an issue when it came on at speed on the M6Toll last week, that's only a dash light but still I pulled over checked and then off the m'way before I shredded the tyre Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
19th Dec 2016 9:43 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Probably worth doing .. can't see the initiators being that expensive ( then again it is a landrover !)G4 Gone ...but not forgotten
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
19th Dec 2016 10:14 am
dave699
Member Since: 02 Aug 2016
Location: North East
Posts: 76
Initiators seem to be universal across lots of models
RRE000010
Can only find LR044370 for the receiver but this is 433Mhz and I am not sure if it is 433Mhz or 315Mhz I need to find.
19th Dec 2016 11:29 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
433 would be uk
315 USAG4 Gone ...but not forgotten
19th Dec 2016 4:37 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Yep 433 U.K.
G4 Gone ...but not forgotten
19th Dec 2016 4:47 pm
dave699
Member Since: 02 Aug 2016
Location: North East
Posts: 76
That's very helpful, thanks
Do you know the significance of the AA or AB at the end.
Will either work on my 2010 or is there a way to find out which one will work?
19th Dec 2016 7:23 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
normally just a revised software version ...AB being newer than AA
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum