Member Since: 30 Nov 2014
Location: Southend on Sea
Posts: 180
multi height tow bar - a dumb question
Ok grabbed a bargain on flea bay, a multi height towbar for £55,
All is complete, but I have a question maybe a dumb one .
So I prefer the look and level of protection that the multiplate gives to the back bumper, so can I safely fit the tow ball to the 400mm height using 90mm bolts to allow for the ball, the spacer, multi height plate, and the main piece that locks into the bumper. The multi height plate being fixed so that I could move the ball to the 350mm height if needed.
I run it like that but with the plate upwards and don't see any issue with it. Does look much neater with it IMO. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
Last edited by Lost for Words on 18th Oct 2016 12:01 pm. Edited 1 time in total
18th Oct 2016 9:03 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8205
I have taken the heavy drop plate off altogether, not necessary unless you need a very low height and still gives two heights and will not hit the ground if offroading It can when others can't,
It will when others won't,
It goes where others don't.
18th Oct 2016 9:10 am
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
Here is another discussion on the tow ball heights
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum