Dan435
Member Since: 07 Apr 2016
Location: Essex
Posts: 5
|
Discovery 3 auto box mechatronic unit |
|
Hi all
Good to find a forum with lots of members and a massive amount of info to hand.
Here we go! I'm proud owner of a 2005 disco 3 which sadly had a gearbox fault recently. I have had body off and done the cam belts and a full service which was not as bad as I thought. Anyway I sourced a decent gearbox with low mileage and plonked it in there. Cut a long story short old gearbox that was removed was left outside workshop and has subsequently gone missing but was not over fussed until body was back on and car in fail safe. Done a little research and am told that I should of removed the mechatronic unit from it before disposing. I now have a fault code saying no communication with gearbox control module. Which is the mechatronic unit which at a geuss is coded through can bus. Can anyone help me is there a way of resolving I'm told by a friend that you cannot re code
Please help me any guidance would be really appreciated. Dan
|
7th Apr 2016 10:42 pm |
|
|
Rick-the-Pick
Member Since: 17 Dec 2013
Location: Hove, Sussex
Posts: 23
|
You need to program the gearbox mechatronic into the system. This can be done with diagnostics.
I'm doing one this week.
|
13th Apr 2016 9:50 am |
|
|
Dan435
Member Since: 07 Apr 2016
Location: Essex
Posts: 5
|
Do you know what diagnostics I would need? What data would I need to put into it. Really appreciate the reply. I'm still stuck with a dead car
|
13th Apr 2016 9:54 am |
|
|
Dan435
Member Since: 07 Apr 2016
Location: Essex
Posts: 5
|
As I have not got old mechatronic unit or numbers off old gearbox as its been taken by scrap collector
|
13th Apr 2016 9:57 am |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
|
I think it needs to be programmed when warm within a specific temp range? “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
13th Apr 2016 10:27 pm |
|
|
Dan435
Member Since: 07 Apr 2016
Location: Essex
Posts: 5
|
Bought a new one from dealer!! Ouch££££ needed a car on the road
|
16th Apr 2016 3:15 am |
|
|
Rick-the-Pick
Member Since: 17 Dec 2013
Location: Hove, Sussex
Posts: 23
|
I use IDS VCM.
Go into special programming, select gearbox, & the diagnostics will pick up that it needs programming & will program it to the vehicle. Easy task. I've done it quite a few times now.
You will need to callibrate suspension, transfer box as well.
|
25th Apr 2016 11:03 am |
|
|