Member Since: 08 May 2016
Location: Essex
Posts: 422
Mantec
Good evening I am having my sump guard delivered in the morning I got it from eBay second hand and has no bolts the seller said it was a genuine mantec Land Rover one but has no holes in the front lip just the hole for the recovey point all the ones on mantec site have slots cut in the front lip or is mine a old style can any body tell me what bolts I need ect and how to fit it cheers
31st May 2016 11:13 pm
Dickydisco
Member Since: 03 Feb 2009
Location: Colchester
Posts: 501
From memory you will need countersunk bolts with a hex head. Can't recall the thread, maybe M10's. Current: D3 commercial
Past: but not forgotten D3 HSE x2, 5 TD5 disco2's, 1 200tdi disco1, 2 300tdi disco1 one of which was a commercial, Off roader with a rather large spec, ARB's and big travel suspension to name a few.
Pajero SWB 2.8 for off road playdays
http://www.youtube.com/watch?v=yYBx3SCl8vs check this for laughs
1st Jun 2016 10:50 pm
btekcan
Member Since: 24 Dec 2014
Location: Istanbul
Posts: 201
Re: Mantec
Steve17 wrote:
Good evening I am having my sump guard delivered in the morning I got it from eBay second hand and has no bolts the seller said it was a genuine mantec Land Rover one but has no holes in the front lip just the hole for the recovey point all the ones on mantec site have slots cut in the front lip or is mine a old style can any body tell me what bolts I need ect and how to fit it cheers
This is my mantec sump guard, you'll need 4 M10 bolt. Other 2 hole will be use existing bolts.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
