Member Since: 09 Jan 2015
Location: Buckingham
Posts: 52
Gearbox breathers
Help required please,
I currently have the body off on my 2005 D3, manual,
there are 2 breather pipes leaving the top of the gearbox assembly, one slightly larger diameter than the other
I assume these are supposed to run up the back of the engine to above "fording depth", however, mine were just dangling loose down near the fuel filter???
The larger diameter one has a P clip on it, and the thinner one is clipped to the larger one with a double plastic clip, I cant really see which bolt the larger one is meant to be attached to secure it to the back of the engine. it is quite badly bent, this is why its not really obvious where its meant to go
Any help would be greatly appreciated, photos even more so
27th Mar 2015 7:04 pm
Petenotginge
Member Since: 09 Jan 2015
Location: Buckingham
Posts: 52
Anyone?
27th Mar 2015 10:18 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Not a very good pic but you can work it out,I'm sure I have a better one somewhere I will See if I can find it,I'm out all day tomorrow so will be Sunday
Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
27th Mar 2015 10:38 pm
Petenotginge
Member Since: 09 Jan 2015
Location: Buckingham
Posts: 52
Cheers Woody,
that helps loads, I can see now they run up between the crossover pipe vertical brackets and the p clip must be onto the coolant pipe securing bolt, as that's the only bolt small enough to go through the clip in that area,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
