Member Since: 17 Jul 2013
Location: Cannington, Ontario
Posts: 120
Headscratcher - Robbie??
Yesterday, had a rear wheel bearing replaced. They went to drive the truck off the hoist and out of the shop. Turn the key, hear a clunk, lots of lights on dash. With key in 2nd position, could shift through all gears without foot on brake pedal. Autologic can't connect with anything. Hard reset, still no luck. Check brake light bulbs. One out, replaced. Still no luck. Started checking fuses under the hood. Fuse 17 for injectors looked different than the others. Pulled it out to look at, put it back in. Truck started up as if nothing had ever been wrong. Replaced fuse. So far, so good. Ideas?
25th Mar 2015 1:33 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Vanishing faults, never easy.
Clearly you should not be able to shift out of park without your foot on the brake, so suspicion starts with the brake switch itself.Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum