Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

PDC difficult to engage...
Post Reply  Down to end
Page 1 of 1
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3
PDC difficult to engage...

Can't seem to find an answer to this one in a search...

My rear PDC won't always engage when I select reverse (MY05, manual) the first time but if I put it back in neutral then firmly select reverse again it starts up.

Is there a switch or sensor that I need to swap out or clean perhaps?

Cheers,

Darren
  
Post #127008615th Apr 2014 8:09 am
View user's profile Send private message View poster's gallery Reply with quote
Woolmeister
 


Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3464

Ukraine 

It's possible that your gearbox XY sensor has lost calibration. If your reversing lights also don't come on, and the gear display on the dash is slow to display, then this is the most likely cause.

Solution here: http://www.disco3.co.uk/forum/topic46472.html

Normally, you would expect to see the amber park brake light come on as well in this scenario, though.


Steve
 2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park! 
 
Post #127010215th Apr 2014 8:36 am
View user's profile Send private message View poster's gallery Reply with quote
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Cheers Steve - I'll check the reverse lights but I'm pretty sure they are fine, I have Advanced Factors LEDs in there so you know when they are on! Also, there is no delay in the 'R' appearing in the selector display on the dash.

Any other suggestions out there?

Cheers,

Darren
  
Post #127016415th Apr 2014 10:42 am
View user's profile Send private message View poster's gallery Reply with quote
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Anybody? Question

Does the rear PDC engage with the reversing lights or does it have it's own contact that is failing to be made without the gear stick being put into reverse firmly?

Any help appreciated.

Darren
  
Post #127032215th Apr 2014 5:32 pm
View user's profile Send private message View poster's gallery Reply with quote
BrianT
 


Member Since: 17 Nov 2009
Location: Ayrshire
Posts: 2069

Scotland 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Santorini BlackDiscovery 4

Mine also does this,
I think patience is the order of the day, when I select reverse I wait for the mirrors to finish moving,let the EPB off and all is good, if I just put it into reverse and release the EPB straight away it tends not to activate the PDC every time.

Spoke to Disco_Mikey about this and he reckons his does the same.

Hope this helps.

BrianT Thumbs Up
 MY 16 Landmark Santorini Black
MY 05 SE Adriatic Blue (Gone but not forgotten)
 
 
Post #127033715th Apr 2014 5:51 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
omg!
 


Member Since: 01 Jun 2011
Location: Fife
Posts: 569

Scotland 2005 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

Mine does this all the time. I found that the solution is to pause in neutral instead of going straight from a forward gear to reverse.
  
Post #127035115th Apr 2014 6:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20836

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

My Auto does exactly the same. Would appear to potentially be a software issue, as the later models tend to be a bit quicker, and more reliable at coming on.

Do you have your clock on dash, or 3 flash etc enabled?
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #127036615th Apr 2014 6:30 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
L319
 


Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2083

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

My Auto is the same, I find it helps to keep the footbrake on when selecting reverse.
  
Post #127038415th Apr 2014 6:50 pm
View user's profile Send private message View poster's gallery Reply with quote
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Disco_Mikey wrote:
My Auto does exactly the same. Would appear to potentially be a software issue, as the later models tend to be a bit quicker, and more reliable at coming on.

Do you have your clock on dash, or 3 flash etc enabled?


Yes I do actually; dash clock, 3 flash and 4x4. Is this possibly a symptom of those upgrades then Mikey?

Cheers,

Darren
  
Post #127066616th Apr 2014 7:41 am
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20836

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Was just a bit of guesswork, as mine was fine, until the BCM was updated for 3 flash, as has BrianT's ...
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #127067216th Apr 2014 7:58 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Mine hasn't always done it but I'm not sure when it started.

with x3 people might be more than a coincidence?

If it can't be fixed though I would rather keep the upgrades and put up with a temperamental PDC.
  
Post #127067516th Apr 2014 8:05 am
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20836

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Laughing I wouldn't be without my 3 flash any more
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #127067616th Apr 2014 8:08 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DiskoStew
 


Member Since: 15 Apr 2013
Location: Location: Location:
Posts: 650

United Kingdom 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

BrianT wrote:
Mine also does this,
I think patience is the order of the day, when I select reverse I wait for the mirrors to finish moving,let the EPB off and all is good, if I just put it into reverse and release the EPB straight away it tends not to activate the PDC every time.

Spoke to Disco_Mikey about this and he reckons his does the same.

Hope this helps.

BrianT Thumbs Up


Bang on Brian, many thanks. I have now found it is not at all related to the firm second attempt, it was just that the system was ready by the second attempt.

I now do it once in an orderly fashion and it works every time. Thumbs Up

Cheers,

Darren
  
Post #127177818th Apr 2014 4:09 pm
View user's profile Send private message View poster's gallery Reply with quote
BrianT
 


Member Since: 17 Nov 2009
Location: Ayrshire
Posts: 2069

Scotland 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Santorini BlackDiscovery 4

Thumbs Up
 MY 16 Landmark Santorini Black
MY 05 SE Adriatic Blue (Gone but not forgotten)
 
 
Post #127194118th Apr 2014 10:30 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
redlabel
 


Member Since: 11 Oct 2010
Location: Tromsdalen
Posts: 25

Norway 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

I have the same issue with my 07.......scary shait as my girlfriend relies to much in them!
  
Post #127325122nd Apr 2014 9:57 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site