Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
PAS pipe burst on holiday - Updated
Is there anyone local to Hulme End, SK17 Derbyshire? I'm on holiday with the family, in the tin tent, and my high pressure PAS pipe has burst, dumping all the fluid. I have to tow home to Norfolk on Saturday morning. I could really do with a viscous fan spanner. Any one close.?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
Last edited by rrhool on 5th Jun 2021 8:37 pm. Edited 1 time in total
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
3rd Jun 2021 6:05 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
High pressure pipe. Got one on order, but have to drive 15 miles to get it, without power steering.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
3rd Jun 2021 6:10 pm
ds23man
Member Since: 19 Jan 2013
Location: Ainum
Posts: 227
Well, a 15 mile drive without fluid in your system will ruin your pump.Citroen DS23IE
Audi A6 2.4 V6 Avant Quatro (1998)
Audi 80 2.6 v6 Cabriolet (1996)
John Deere 4240S
McCormick 323
3rd Jun 2021 6:17 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 13901
I'd call the big yellow taxi and get them to take you home and fix it there.New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
3rd Jun 2021 7:20 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8090
You are not far from Paddock Motor Spares at Matlock they stock everything for LR, ask them to send one by taxi and fluid of course, I assume you are not in the AA!
DSL at Wirksworth are highly recommended for LR repairs, that probably is where you are getting the pipe from, if you where a bit closer I could help you and I have all the tools. One thing for sure you have picked the right county to break down Derbyshire is full of LR repairers.
As already said if you run the engine without oil in the pump you will ruin it.It can when others can't,
It will when others won't,
It goes where others don't.
Last edited by M3DPO on 3rd Jun 2021 7:50 pm. Edited 1 time in total
3rd Jun 2021 7:23 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
Thanks for the replys.
If the one I've ordered is correct, and if I can fit it tomorrow, I'm OK. If not, I'll tow the tin tent off site to a layby, and will phone the break down people. I only have recovery, not road side repair, as I thought I could fix anything!
Would be easier if I had my viscous fan spanners with me!Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
3rd Jun 2021 7:29 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4651
Have you got a med/large adjustable wrench and a decent hammer with you?
If you can fit the wrench onto the fan coupling it will "shock off" easily with a few hammer blows (clockwise)
Just be sure to do the same anticlockwise once everything is refitted!!yµ (idµ - eAµ) ψ=mψ
3rd Jun 2021 7:42 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
I have a fairly sizeable adjustable, it just won't quite fit the fan nut. The fan has been off before, so shouldn't be too tight. I did try with a big pair of Swan neck grips ( whilst grimacing) but it won't quite do it. I think I can change the pipe without taking the fan off hopefully.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
3rd Jun 2021 7:50 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4651
No a grips won't do it as you need to be able to shock it. If you're desperate and have no other option it can be done with a blunt chisel and hammer. If you strike a couple of blows close to the shoulder, then turn to the next shoulder and repeat it will come undone.
Not a pro approach but sometimes needs must. yµ (idµ - eAµ) ψ=mψ
3rd Jun 2021 8:13 pm
raincloud
Member Since: 16 Aug 2011
Location: nottinghamshire
Posts: 136
rrhool wrote:
Thanks for the replys.
If the one I've ordered is correct, and if I can fit it tomorrow, I'm OK. If not, I'll tow the tin tent off site to a layby, and will phone the break down people. I only have recovery, not road side repair, as I thought I could fix anything!
Would be easier if I had my viscous fan spanners with me!
Is the new pipe coming from a factors or a garage?
If from a garage can you not ring them to see if you can get the vehicle recovered to them and get them to fit it?
3rd Jun 2021 9:01 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
It's being delivered to a localish garage, from Chester LR main agent. The garage has already said they are too busy to do it.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
3rd Jun 2021 9:25 pm
James W
Member Since: 27 Mar 2008
Location: Wirral, UK
Posts: 3067
Really sorry to hear this Rich - what a nightmare.
I have TD5 viscous spanners but I'm not sure if they are the same size for a D3. If they were I could drive them out to you tomorrow of you were just a bit closer to Chester... I can't make a gap big enough to do that on your current location (it's 1.5 hrs each way).
Hope you manage to get it fitted without removing the fan! Was it the rubber that split or did a crimped end go on it?D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
3rd Jun 2021 10:19 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
The fan cut a gap in it! Don't know why it was positioned such as it was, but it did. Thanks for the thought James, but I'll get it sorted somehow!Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
3rd Jun 2021 10:27 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15213
Feel sorry for you ...... that’s not what you need on a holiday, especially with a caravan on tow.
Best of luck in getting it sorted. I was a normal heterosexual chap, but in these new woke awakenings I now identify as a Wardrobe.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
whilst grimacing) but it won't quite do it. I think I can change the pipe without taking the fan off hopefully.
