davehooook
Member Since: 01 Jul 2017
Location: Bristol
Posts: 10
 
|
| P017 / Oil in Servo Technical Bulletin |
|
Does anyone have a copy, or know where I can obtain a copy of the original 2009 Technical Bulletin related to resolving the lack of braking issue cause by Oil in the Servo / P017 recall action. (not the notice to customers, but the instructions on what needs replacing and how)
I am after the one issued by Landrover to all its UK Dealerships.
Thanks
|
 13th Jul 2018 8:53 pm |
|
|
|
|
davehooook
Member Since: 01 Jul 2017
Location: Bristol
Posts: 10
|
Thank you !
Okay, so I have a paper copy of bulletin LTB000736 that was issued 19th Jan 2015. The 2015 bulletin says that owners may report a concern of a hard brake pedal and / or reduced braking efficiency. The cause is sited to be Engine Oil Migration to the Brake Booster via the vacuum pump and vacuum pipes.
It then says that along with replacing the brake booster,and pipes, the vacuum pump also needs changing on VIN 5A000268 to VIN 7A440620
Specifically it says to remove the existing Vacuum pump. Then on the pump remove the primary port spigot and valve and discard. Next Remove and discard the vacuum pump inlet valve spring (left hand port on the 2009 instruction - that discusses the RH port). Then install a new ball value and washer on LH port. Then finally install a new primary port spigot on the NEW brake vacuum pump.
Am I missing something or are Landrover now suggesting you need a new vacuum pump and primary spigot as of 2015 to resolve the oil in brake servo issue?
|
| 13th Jul 2018 9:58 pm |
|
|
|
|
