| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Dave P
Member Since: 15 Jun 2008
Location: Essex
Posts: 12
  
|
| Fitting Land Rover BT Kit (Part 2) |
|
 Hi, I think I am slowly getting there on fitting the module, however I have a couple of small concerns, How easy is it to dismantle the steering wheel to fit the buttons? and if I already have the PTT switch with microphone can this be conected to the bluetooth unit, any ideas where the original microphone terminates and can it be extended? Thank you
|
 1st Jul 2008 9:35 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
  
|
this might help http://www.disco3.co.uk/forum/topic3843.ht...el+removal
The bluetooth mic sits up in the little vent in the light consul at the front ..it has a little connector there .The bluetooth kit comes with an extension wire which plugs in there and comes down to behind the radio
Pull the light fitting down from the front ( nearest the screen ) first and it will just come off ..you can then have a look .
The ptt switch ..if you mean the same ..only have one connection under the switch ..dont know where the other end goes to though.
If you make it a bit more clearer as to what you already have and what your trying to fit i may be able to help you more  G4 Gone ...but not forgotten
|
| 2nd Jul 2008 2:02 pm |
|
|
Dave P
Member Since: 15 Jun 2008
Location: Essex
Posts: 12
|
Wiggs thanks for the reply, I have taken off the light cover and there is already a microphone in there, I wondered if I could use the existing microphone rather than installing another one. the existing microphone is the same as the one supplied with the BT kit. the existing microphone is used to communicate with the sat nav etc. Many thanks again for your assistance. Dave
|
| 2nd Jul 2008 9:14 pm |
|
|
asj968
Member Since: 01 Jul 2008
Location: Kent
Posts: 74
|
Hi all my first post......
So how did this saga turn out?
I am looking at purchasing a Discovery 3 HSE but the one i am going to see does not have the BT kit - something I would prefer if poss - I have ..... surprise surprise an N95.
There must be a few experts out there now on fitting this kit? 
|
| 9th Jul 2008 10:09 pm |
|
|
Dave P
Member Since: 15 Jun 2008
Location: Essex
Posts: 12
|
 Hi Welcome to the site,
I am getting there with fitting the unit and i wouldn't have got this far without the assistance from this site. I would make sure if you buy the upgrade kit you buy all the right modules some for sale have out of date modules and modules missing. I think you should allow a good half a day if you are fitting yourself< I am not sure how much the stealer's will charge. I hope this helps all the best Dave
|
| 9th Jul 2008 10:25 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
asj968
The LR bluetooth kit is quite expensive , but works great and has good voice dialling .
Be wearey buying off ebay, they normally dont have the main bluetooth part which is round about £150 for the unit.
You can use any bluetooth kit with an adapter lead to get sound through the stereo ( about £20 )
Just shout if you need any more info or part numbers G4 Gone ...but not forgotten
|
| 9th Jul 2008 11:07 pm |
|
|
asj968
Member Since: 01 Jul 2008
Location: Kent
Posts: 74
|
Thanks, I will
First to buy myself a shiny HSE. I go on holiday in 2 weeks so would prefer to get one before then - much prefer the idea of 4 weeks in france with new toy as opposed to my freelander. 
|
| 10th Jul 2008 9:27 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
