Kenny57
Member Since: 12 Apr 2020
Location: Essex
Posts: 169
|
Hi folks,
I've had a couple of intermittent C112-72 (xx) faults but the manual is a bit vague about which valve might be the issue. They're usually followed a minute or two later by a C1130-66 (xx) fault with the same (xx) suffix. Mine are (AF) or (2E) but I see from some of the posts on here that ( 28 ) and ( 68 ) have also been seen. Dose anyone know if the code in brackets indicates the particular valve at fault and if so is there a list?
Thanks
Kenny
|
18th Sep 2021 9:34 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
Page 87 of the GAP manual gives an explanation of the 4th element but to be honest I got lost early on trying to read it
|
19th Sep 2021 7:07 am |
|
|
Kenny57
Member Since: 12 Apr 2020
Location: Essex
Posts: 169
|
Ok great, thanks Sea Raider, that at least explains the suffix in brackets.
Its the results of analysis of the fault by the ecu and whether it decided to issue a warning or not. They've just compressed the look-up table into Hex which gives two numbers/characters. Nothing to do with the location in of the fault sadly, but worth a try.
Just put it back together and took it for a test drive. All seems to be working ok for the moment so will wait for the next "event" before investigating further.
|
19th Sep 2021 7:35 am |
|
|