Mud flaps

From DISCO3.CO.UK Knowledge Base
Revision as of 13:51, 28 April 2009 by CG (talk | contribs) (New page: Mudflaps on a D3 http://www.disco3.co.uk/gallery/albums/userpics/13364/normal_DSCN1145.JPG The factory fit Discovery 3 rear mud flaps have a couple of major flaws, firstly they are not ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Mudflaps on a D3

normal_DSCN1145.JPG

The factory fit Discovery 3 rear mud flaps have a couple of major flaws, firstly they are not very big, and secondly they are not very flexible.

One alternative is Series 3 mud flaps. These are nice and bendy and some £60 cheaper. mine came from Craddock's and cost only £14, but many others are available.

normal_DSCN1142.JPG

You will need to cut out a section to clear the exhaust on both sides. I wanted to used at least one of the std trim/mud flap fittings.(the one with the black washer) Here I made a spacer out of spare material, this allows the mudflap to stand out from the indent of the o/e fitting. Also used as can be seen are 2 M6 bolts/nuts and a self tapper in the wheel trim.

normal_DSCN1146.JPG