Difference between revisions of "IIDTool Calibration Values"
From DISCO3.CO.UK Knowledge Base
(New page: =Ride Height= Measure from the wheel centre to the bottom of the wheel arch. ===Range Rover Sport=== Standard ride height. Front 461mm aim for a tolerance of +- 10mm Rear 465mm aim f...) |
(→Range Rover Sport) |
||
| Line 5: | Line 5: | ||
===Range Rover Sport=== | ===Range Rover Sport=== | ||
| − | Standard ride height. | + | Standard ride height. |
| + | Measurements are taken from the centre of the wheel to the bottom of the wheel arch. | ||
Front 461mm aim for a tolerance of +- 10mm | Front 461mm aim for a tolerance of +- 10mm | ||
Rear 465mm aim for a tolerance of +- 10mm | Rear 465mm aim for a tolerance of +- 10mm | ||
Revision as of 08:20, 20 September 2013
Ride Height
Measure from the wheel centre to the bottom of the wheel arch.
Range Rover Sport
Standard ride height.
Measurements are taken from the centre of the wheel to the bottom of the wheel arch. Front 461mm aim for a tolerance of +- 10mm Rear 465mm aim for a tolerance of +- 10mm
