Difference between revisions of "Hints & Tips"
From DISCO3.CO.UK Knowledge Base
(→=) |
|||
| Line 18: | Line 18: | ||
If you lean on the passenger seat while the engine is running the alarm will go off. | If you lean on the passenger seat while the engine is running the alarm will go off. | ||
| + | |||
| + | === Disable/enable the automatic interior lights === | ||
| + | |||
| + | *Press and hold the middle button in the overhead console for about 5 seconds | ||
| + | *The interior lights will flash | ||
| + | *The interior lights will now stay off when a door is opened | ||
| + | |||
| + | Repeat above procedure to enable the automatic interior lights | ||
Revision as of 22:41, 8 March 2008
Disable the audible seat belt alarm
- Switch on ignition
- Insert & remove seat belt latch 9 times within one minute. It helps to hold the release button down.
- The D3 will bing to say it's disabled.
Note that the red seat belt warning light will still appear on the dash.
ONLY do this if you really can remember to use your seat belt. Safety 1st !
Repeat above procedure to enable the audible alarm.
USES:
If you are constantly in and out of the D3 for any reason and do not wear your belt, the alarm can get annoying.
If you place items on the empty passenger seat the alarm will go off over bumpy ground.
If you lean on the passenger seat while the engine is running the alarm will go off.
Disable/enable the automatic interior lights
- Press and hold the middle button in the overhead console for about 5 seconds
- The interior lights will flash
- The interior lights will now stay off when a door is opened
Repeat above procedure to enable the automatic interior lights
