Difference between revisions of "Charging through towing socket"
From DISCO3.CO.UK Knowledge Base
(→13 Pin) |
m |
||
| Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
| − | Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the | + | Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the 13 pin socket. |
The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger. | The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger. | ||
| Line 9: | Line 9: | ||
===12S=== | ===12S=== | ||
| − | The 12S socket is the | + | The 12S socket is the 'caravan' socket with the white cover: |
http://www.disco3.co.uk/gallery/albums/userpics/13177/wiki1_CIMG3747.JPG | http://www.disco3.co.uk/gallery/albums/userpics/13177/wiki1_CIMG3747.JPG | ||
| Line 23: | Line 23: | ||
http://www.disco3.co.uk/gallery/albums/userpics/10002/wiki1_trailer_plug_13pin.png | http://www.disco3.co.uk/gallery/albums/userpics/10002/wiki1_trailer_plug_13pin.png | ||
| − | Note: Pin numbers are looking at cable side of ''' | + | Note: Pin numbers in the diagram are looking at '''cable side of the PLUG''' or '''mating side of the SOCKET''' |
Pin 9 12V (Positive)<br/> | Pin 9 12V (Positive)<br/> | ||
Pin 13 Ground (Negative) | Pin 13 Ground (Negative) | ||
Revision as of 10:24, 29 November 2012
Contents
Introduction
Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the 13 pin socket.
The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger.
Pinout
12S
The 12S socket is the 'caravan' socket with the white cover:
Pin 3 Ground (Negative)
Pin 4 12V (Positive)
13 Pin
Note: Pin numbers in the diagram are looking at cable side of the PLUG or mating side of the SOCKET
Pin 9 12V (Positive)
Pin 13 Ground (Negative)
