Difference between revisions of "Charging through towing socket"
From DISCO3.CO.UK Knowledge Base
m |
(→13 Pin) |
||
| Line 20: | Line 20: | ||
http://www.disco3.co.uk/gallery/albums/userpics/13608/wiki1_tow1.jpg http://www.disco3.co.uk/gallery/albums/userpics/10002/wiki1_13%20pin.jpg | http://www.disco3.co.uk/gallery/albums/userpics/13608/wiki1_tow1.jpg http://www.disco3.co.uk/gallery/albums/userpics/10002/wiki1_13%20pin.jpg | ||
| + | |||
| + | http://www.disco3.co.uk/gallery/albums/userpics/10002/wiki1_trailer_plug_13pin.png | ||
| + | |||
| + | Note: Pin numbers are looking at cable side of '''PLUG''' | ||
Pin 9 12V (Positive)<br/> | Pin 9 12V (Positive)<br/> | ||
Pin 13 Ground (Negative) | Pin 13 Ground (Negative) | ||
Revision as of 13:00, 15 November 2012
Contents
Introduction
Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the newer 13 pin socket.
The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger.
Pinout
12S
The 12S socket is the older type 'caravan' socket with the white cover:
Pin 3 Ground (Negative)
Pin 4 12V (Positive)
13 Pin
Note: Pin numbers are looking at cable side of PLUG
Pin 9 12V (Positive)
Pin 13 Ground (Negative)
