| Search results - "fit" |
139 viewsThe weatherproof junction box fits neatly down the front of the battery, all contained inside the battery box.
|
|
754 viewsNew control rod is carbonfibre/fibreglass hollow tube, with a rubber grommet fitted to one end (screwed and epoxy-ed) and steel rod bent into shape at the other (epoxy-ed).
|
|
heated seat (base) wiring411 viewsThe Small connector takes the plug from the seat back pad, the larger connector (with red) is fitted into the multiplug casing uder the seat - the male side of this is already pre-wired.
|
|
460 views
|
|
368 views
|
|
Silverstone Media Day86 viewsTook 3 cars for display .... a RRR members off-road modified RR p38a, unusual as it has the 2.8L version of the 300tdi fitted.
|
|
Navigation/Video screen fits perfectly386 views
|
|
370 views
|
|
374 views
|
|
fittings for expo rack67 views
|
|
369 views
|
|
Samsung Galaxy Tab Sat Nav123 viewsVery nearly a very good fit for pauper-spec D3\'s - the Galaxy Tab running Google Map Navigation
|
|
114 viewsboth adapter the larger one needed a bit chopped off the botom and the washers to fit
|
|
127 viewsleft hand adater adopted, decided right hand adapter was ok but right hand one fits and is stronger
|
|
Fitted Dog Guard104 views
|
|
555 views
|
|
09 Starting to remove the seized brake assembly296 viewsBy this time we\'d poured about 8l of water on the dull-red glowing and burning wheel assembly (too close to 140l of 98 octane petrol). Sudden cooling cracked the disk brake which showed mangled park brake parts. How to remove a brake disk without the right star fitting? First remove the caliper then get a sledge hammer?!!
|
|
COVER SHOT FOR TOTAL OFF ROAD114 viewsG WAGEN AXELS FITTED WITH HYDRAULIC FRONT + REAR DIFF LOCKS + EXTREAM SUSPENSION SYSTEM FRONT + REAR WARN WINCHES.
|
|
Before fitting the OE display97 views
|
|
Bracket drilled and fitted218 views
|
|
New compressor plate740 viewsFitted between the chassis rail and the new sill protector.
|
|
160 viewsThe switches fit into the new holes in the bracket
|
|
![100_2778[1].JPG](albums/userpics/22146/thumb_100_2778%5B1%5D.JPG "Filename=100_2778[1].JPG
Filesize=186KB
Dimensions=1280x960
Date added=13.Oct 2014")
29 viewsfront cam fitted
|
|
Temporary fit for Centre Console19 views
|
|
sunroof drain fitting63 views
|
|
11207 viewsThe controller components are complete and fit neatly within the boot space.
|
|
Thread upload39 viewsImage uploaded in thread 120468
|
|
Centre console 12v & aux panel fitted281 views
|
|
13 Pin Socket Towing Electrics Fitting Instructions224 views
|
|
13267 viewsHad to cut the dash a bit in order for the video screen to fit nicely in the spot...ouch.
|
|
33 viewsHalfords fitting kit
|
|
my new car282 views
|
|
14320 viewsFitting the video screen.
|
|
load retention rails fitting instructions38 views
|
|
Load retention system fitting instructions47 views
|
|
Fitting bolts, painful!!302 views
|
|
This is a H7R bulb fitted into the same headlight - look at cut off and no glare116 viewsPerfect like OEM what more can i say
|
|
This is a normal H7 HID bulb installed in a BMW headlight to show glare above cut off line99 viewsThis is what the light pattern is that causes glare in most retofit applications including some projector lights. this is in fact a projector headlight on a BMW but the old projectors were only actually half projectors and half reflective bowls. the beam pattern should be clean cut like this ___/
|
|
H7R Headlight retrofit H7R HIDS4U notice no light in bottome half of the bowl98 viewsThis is how a retofit HID should look in a reflector headlight
|
|
Standard hid bulb - light everywhere and glare caused by light in bottom of bowl97 viewsWhilst the beam pattern is ok the problm is that with 300% more light the spillage into the bottom of the reflector bowl is seen as glare by other motorists. it also is the reason the overhead motorway signs are lit up so well be bad retrofit xenons
|
|
New 295/45R20 114V XL Hankook Ventus ST tyres fitted on 20" RRS Supercharged 20" Alloys123 views
|
|
It fits!189 views
|
|
The TomTom GO fits neatly!3249 views
|
|
Noki cradle fits snug in the cup holder386 views
|
|
Raised Air Intake Fitted357 views
|
|
Perfect fit, using all existing bolt holes979 views
|
|
Checking for fit, free-spool lever needed to be modified1028 views
|
|
Solenoid pack fitted991 views
|
|
Back of bumper shows pre-fitted fog lamp brackets988 views
|
|
Fits like a glove!!847 views
|
|
Pre-wired loom is an easy fit1047 views
|
|
Rock Sliders Fitted311 views
|
|
35 viewsFitted camera in tailgate handle
|
|
132 viewsTraxide SC80 brain modified. Cut the studs down to the nuts and removed the rubber cover. Had to do this as otherwise it wouldn't fit comfortably and would squash the brake vacuum pipe
|
|
108 viewsTest fitting the screen. The bottom edge of the rear cover of the screen has been already dremeled off in this pic, notable as the circuit board can be seen.
|
|
98 viewsCut the original rubber mat to fit flush with the screen
|
|
109 viewsThis is the plug for the accessory socket at the rear of the cubby box. On commercial D3 such as this one, there is no accessory socket so this plug is unused. I tapped into the 12V wire as an ignition feed. This will feed a relay coil which opens up power from the aux battery. Like this I can still retro fit and make use of the accessory socket later on.
|
|
79 viewsHole for 12V accessory socket. This hole has a blanking plate on it on Commercial D3s. It just needed to be filed down in some areas to fit the socket I bought.
|
|
78 viewsElectrical items fitted in place and wiring in progress
|
|
125 viewsOptima Yellow Top in battery box. This is the version with side terminals so there will be some modifications to be done to fit
|
|
112 viewsDue to the side terminals protruding out the side and affecting the battery clamp, I found the battery will fit better if it could be pushed a few millimeters towards the engine. This lip will have to be removed.
|
|
115 viewsModified battery clamp test fitting on battery.
|
|
64 viewsCut a slot in the socket grip to fit the cutout
|
|
Scrape to fit18 views
|
|
148 viewsDetail of d3wing cut to fit d4 lights and bumper
|
|
Disco 4 Fitment56 viewsFL2 screens fitted in D4 headreat
|
|
Front caliper on D4 to fit 17" rims136 views
|
|
big jeep28 viewswent to collect my optima battery...this was in getting a new wing fitted
37" wheels are quite big...
|
|
Rear Screen in headrest 23 viewsscreen fitted after cutting leather
|
|
Rear screens 22 viewsRear screens fitted
|
|
new screens fitted 27 viewsAfter installation
|
|
odd trend22 viewsfitting tyre to a rim which is too wide
|
|
Thread upload127 viewsNew silicone hose with original sleeves refitted.
|
|
Rhino Hitch429 viewsCover fitted over the 75A Anderson plug with Rhino Hitch fitted which is a Class IV hitch. https://www.facebook.com/DifferentialPartsUS
Fits the Disco 3, Disco 4 and Range Rover Sport
|
|
3D Printed Samsung Galaxy S5 Phone Mount21 viewsDesigned to fit a Brodit Clip Mount (in this case one for an Isuzu DMAX)
|
|
new hitachi air compressor fitted1 viewsImage uploaded in thread 177818
|
|
TT Box Location146 viewsSmall TT box, easy to fit on spare battery compartment
|
|
Using Mums garage to keep sun off sleeping daughter.... fit wise a bit tight 65 views
|
|
HF radio on RH side Inverter on LH. Frame is fitted behind second row of seats. (I have removed 3rd row as they will never be used)310 views
|
|
311 viewsThule Xpedition 821 Luggage Basket fitted to 861 Aerobars on 751 Feet with 3027 Fitting Kit. All in £360.00
|
|
312 viewsThule Xpedition 821 Luggage Basket fitted to 861 Aerobars on 751 Feet with 3027 Fitting Kit. All in £360.00
|
|
306 viewsThule Xpedition 821 Luggage Basket fitted to 861 Aerobars on 751 Feet with 3027 Fitting Kit. All in £360.00
|
|
302 viewsThule Xpedition 821 Luggage Basket fitted to 861 Aerobars on 751 Feet with 3027 Fitting Kit. All in £360.00
|
|
Thread upload3 viewsImage uploaded in new thread
|
|
LR Dog Guard Fitting Instructions80 views
|
|
4 GPS Ant Fitted in Place58 views
|
|
Air Conditioner Specifications 4.4L V81570 viewsThis 2 page pdf is just the specifications for the AC system. The refrigerant type is R134A.
Note that when topping the system up, it can be a good idea to include some of that ultra violet light dye that will glow to show leaks and loose fitting.
|
|
Fit the 2nd lightguard and then replace the centre grille330 views
|
|
Thread upload0 viewsImage uploaded in new thread
|
|
5 ICE Loom - Location of pre fitted Voice / Speed pulse connector67 views
|
|
Rear light guards fitting instructions56 views
|
|
Thread upload9 viewsImage uploaded in thread 183986
|
|
Thread upload0 viewsImage uploaded in new thread
|
|
7 Voice / Telephone Mic Cable - pre fitted in roof70 views
|
|
Twin 7 Pin Socket Towing Electrics Fitting Instructions264 views
|
|
Thread upload11 viewsImage uploaded in thread 188531
|
|
DGJ 500010PMA/DGJ 500011MMM73 viewsFITTING INSTRUCTION
Rubbing Strips
|
|
Thread upload4 viewsImage uploaded in thread 175193
|
|
9 Voice Telephone Mic Fitted64 views
|
|
Thread upload10 viewsImage uploaded in thread 129546
|
|
UHF CB374 viewsGME TX3400 UHF CB remote head mounted on the front of the ashtray.
A piece of wood was turned to fit the cup holder to mount the GPS
|
|
Ham Radio454 viewsThe remote head of the Icom IC706 mounted on a block of wood shaped to fit the coin holder. This is an HF, VHF and UHV transceiver.
|
|
Ham Radio448 viewsThe remote head of an Icom IC706 was mounted on a piece of wood shaped to fit into the coin holder. This is quite a tight fit and does not shake loose. The radio is mounted under the driver seat.
|
|
Retro Fit ACC ECU connections53 views
|
|
Retro Fit ACC test loom58 views
|
|
1274 views
|
|
Audio Connectivity Module fitting instructions748 views
|
|
AFS Retrofit loom info77 viewsinformation about how to build a loom to retrofit AFS
|
|
rear bracket fitted 160 views
|
|
front of tank fitted 147 views
|
|
fitted ..tucked away 155 views
|
|
tank fitted to rear bracket196 views
|
|
Air Parts57 viewsSubstitue push fit air spring terminators for Disco 3
|
|
AMK_Compressor_Fitting_LTB0042042 views
|
|
Compressor type TSB109 viewsLand Rover TSB regarding Compressor type identification and fitment.
|
|
Modified Oregon AT2000 Mount - still mountable on original fittings82 views
|
|
BCI Group 40R Deka 640RMF battery showing vent hose run forward to windshield washer reservoir area 1430 viewsRecessed post "Euro profile" battery to "match" OEM and stock Land Rover bracket; note that the Traxide SC80-LR module is mounted at an angle to allow for the main cable to sit under the cover so cover still closes.
The battery is a nominal 7", (180mm), high, but sits on a 1" battery spacer set under to raise the bottom front end of the battery such that the approx 11", (290 mm), length of the BCI 40R battery rises above the angled plastic nibs at the forward end bottom of the case front; hence sufficient space, (1/4", 5mm) remains at the brake reservoir end.
Also the 40R battery does not have hold down "flanges" on each end; on the sides yes, but not the ends so no additional length is required.
When I had to replace the 40R, this time I installed the shorter, (9.625"), taller, (7.5") Interstate BCI 47 / DIN H5 battery which eliminated the spacer on the bottom and better fit the stock LR tie down bolt lengths. Deka also has a BCI 47 / DIN H5 that would work fine as well.
|
|
17 views
|
|
Blanking Kit Fitting Procedure2449 viewsHow I fitted the kit to my D3.
|
|
Thread upload6 viewsImage uploaded in new thread
|
|
Thread upload6 viewsImage uploaded in new thread
|
|
Feshly fitted with new BFG 18s48 views
|
|
Fit cable to Blackvue78 views
|
|
Grab handle - fitted37 views
|
|
TDV6 lettering removed, LR Supercharged Badge fitted135 views
|
|
Blitzen with DW\'s A-Bar fitted84 views
|
|
BMW Sensor Fit D3 fron24 views
|
|
OLD VERSION Please check folder for newer. Bodsy's Brake Bible V1.2a6907 views
|
|
96 views
|
|
Thread upload4 viewsImage uploaded in thread 200461
|
|
Normandy March 09 - Big Side Stickers Fitted!76 views
|
|
Thread upload30 viewsImage uploaded in thread 92518
|
|
D3 Side Step Repairs167 viewsWhilst I held the trim in place a second person inserted the rivets from behind the step edge. We started in the middle and worked out either way to ensure a snug fit of the aluminium trim.
|
|
The Car as at July 2009 55 viewsRhino Sunseeker awning still to be fitted
|
|
Sill protectors 2740 viewsThe side protection bar comes out a good 170mm. Prevents side panel damage and car-park knocks! Still deciding whether to fit the chequerplate tops, as originally designed.
|
|
Disco and Boroma with Hyland hitch fitted inverted.153 viewsNote that it is now absolutely level.
|
|
Snow Chains Installed - Land Rover LR3HSE94 viewsSnow Chains that seem to fit a Land Rover LR3HSE
|
|
Brackets fitted to underside of A bar using mounting bracket holes.252 views
|
|
Bracket fitted to A Bar207 views
|
|
Spotlights fitted 1239 views
|
|
Spotlights Fitted 2193 views
|
|
New disc fitted101 views
|
|
New disc and carrier fitted117 views
|
|
Hella Spotlight Fitting 2306 views
|
|
The kit as supplied180 viewsContains carry bag, 2 protector mats, exhaust jack and 7m reinfoced woven hose with bayonet connector to bag (inc non-return valve) and rubber cone for exhaust fitting
|
|
RHS view372 viewsSHows the Front Runner (SA) slimline windcheetah rack which is immensely strong. Takes my 110kg (oh gawd, I must get back on the diet and exercise regime) tramping over it when loading/unloading gear without a problem. Fittings are simply fixed or removed, and IMO very well designed and made. IPF 800 series driving and spots fitted to the front of the rack. IPF cam/reversing fitted each side and to rear of rack for negotiating rocky wadis at night. The G4 stickers were bought off E-bay as a set.
|
|
Front end327 viewsARB deluxe winch bar is very well made. Still allows Mantec sump guard to be used. Warn M8000 winch fitted - (wish I could\'ve found an M15000!) and IPF 900XS Extreme Series mounted with light stays to grille. Fog lights work fine with the replacement bumper, and indicators in bumpoer are effective too.
|
|
Rear end294 viewsLocally made wheel covers. LH is zipped from bottom to top to fit over registration plate with zip fasteners top and bottom. Rear IPF Reversing /camp lights on rack linked to reverse light circuit.
|
|
Mud UK switch binnacle453 viewsToo many switches for the roof mounted console, so this binnacle from Mud UK (desigend for the Defender) is an almost perfect match for the leather finished dash in the LR3. Switches, connectors etc bought from them too. From L - R switch functions are:
LH side mounted rack lamps
Driving lamps rack mounted
Spot lamps rack mounted
Bumper mounted driving lamps
RH side mounted rack lamps
Warn winch isolator
Rear mounted rack lamps (reversing)
Telescopic work lamp (fitted behind RH spare wheel)
|
|
\'Escape\' canvas seat covers269 viewsFull set of these well made SA seat covers fitted to protect the Alpaca leather from constant exposure to Middle EAst sunlight and sand. They fit well, and to date have proved very durable. They include headrest and arm rest covers too.
|
|
Long Ranger auxilairy fuel tank pump switch and tank gauge308 viewsFitted to the right of the air vent thumbwheel, the neat combination switch and gauge take sup no room at all. Switch locks on or off, but no pump running warning lamp! Contents of the tank are indicated by 5 LEDS, 4 green and 1 red for full, 3/4, 1/2, 1/4 and empty. Pump transfer rate of just 2 litres p/min is disappointing. I transfer on the move when main tank is at 1/4.
|
|
Escape seat covers rear254 viewsJust shwing the good fit of these canvas seat covers made in South Africa. The whole set for a 7 seat HSE £542 with air freight as unaccompanied baggage (inside 5 Front Runner Wolf pack boxes) costing and additional £150 - still a bargain out here!
|
|
TracTronics loadspace power socket 382 viewsThe 2nd power socket fitted alongside the original in the loadspace runs off the auxiliary Optima Bluetop battery to run a fridge when engine is not running. No more starting worries!
|
|
LR towing electrics pack 12N/12S313 viewsThe LR trailer electrics fitted before the Kaymar bumper and spare wheel carriers required no modifications are perfectly accessible. Good strong recovery point between the sockets too. The swing awau wheel carrier securing latches can be seen quite clearly here. Long Ranger tank (painted black) nestles where orignal spare was fitted.
|
|
LongRanger auxiliary fuel tank358 viewsThe LR fuel tank imported from ARB in Australia with its 115 litre capacity has more than doubled the range of the car. This is important in the desert where fuel consumption increases at times to 10mpg or less. On a cruise on highways, the car now has a range approaching 850 miles. The tank fits neatly, has not affected handling in a detectable way apart from over speed humps, when a little more bounce from the rear suspension is detected! Suspension copes with the additonal loads without any problem.
|
|
COMM FAILURE in the Faultmate FCR79 viewsThis is ONLY shown if either you have a communication error or in most cases you dont have fitted on your car the module you are trying to communicate with.
|
|
Thread upload4 viewsImage uploaded in thread 204346
|
|
Thomas compressor160 viewsCompressor mounted ontop of the rear wheel arch behind the plastics.
|
|
16 views
|
|
8 views
|
|
Titus Canyon122 viewsAn open section of canyon. Some sections were only wide enough for the D3 to fit through.
|
|
Detroit Fluid DOT air line fittings718 viewsThe picture shows the internal ferrule that is characteristic of the DOT / TUV accepted fittings for highway vehicles. Most often these fittings are metal however the Land Rover John Guest 6mm straight connector is all plastic and has the internal ferrule.
|
|
the road between home and work292 viewsthe day before returning from work, I got stuck here in the middle of the snow storm. The plow didn\'t pass yet and wind was blowing snow everywere. Since then I always carry during winter a survival pack consisting of warm coat,cap, warm, high boots and gloves.
It is no fun recovering a car stuck in the snow and sliding down from the road when moving in nothing more than a business outfit (no gloves, city shoes, no coat) with a snowy wind blowing 100km/h..... .
|
|
Tight fit347 views
|
|
1228 views
|
|
282 viewsCradle in place. Press marked lever down to release the cradle.
|
|
Thread upload4 viewsImage uploaded in thread 198799
|
|
Thread upload10 viewsImage uploaded in thread 128829
|
|
Mantec Plate , Bumper , Lights & Grille removed161 views
|
|
Crash Bar Removed149 views
|
|
Fitting lamp guards185 views
|
|
Lamp guards fitted150 views
|
|
Steering wheel audio controls and iPod dock120 viewsFollowing the instructions I found on Disco3.com.uk it was a breeze the fit the steering wheel audio controls. The iPod dock was a bit more fiddly (took me several hours). Works a treat!
|
|
Steering wheel audio controls and iPod dock103 viewsFitted an iPod dock and steering wheel audio controls. Got then both from Nick at Yeoval Landrover in the UK at a fraction of the price that the Aussie dealer wanted.
|
|
fit to park out front now, put Aston in hayshed92 views
|
|
Fit to park out front now80 views
|
|
18 views
|
|
D3 Kaymar Rear Bar Fitting Sharing20 views
|
|
Thread upload17 viewsImage uploaded in new thread
|
|
Protection material fitted between seat base and seat pan39 views
|
|
Heating Element refitted to new base40 views
|
|
Ready to refit the cover40 views
|
|
Seat base finished and ready to fit39 views
|
|
Finished - new seat base fitted back into D352 views
|
|
Cant fit anything in174 views
|
|
Clips to be removed when fitting a Mantec Plate141 views
|
|
D4 Mantec Fitted 1204 views
|
|
D4 Mantec Fitted 2251 views
|
|
D4 Mantec Fitting Tools Required and bits left over at the end229 views
|
|
D4 hid kit fitted NO FAULTS213 views
|
|
D4 Gvif Unit Fitting28 viewsHow to fit Gvif unit to a D4 sat nav screen
|
|
timed climate reciever fitted 228 views
|
|
Thread upload13 viewsImage uploaded in thread 177406
|
|
MY2011 Discovery DAB retrofitting28 views
|
|
375 ml jam container372 viewsThese are the 375ml Danish Orchard brand jam containers. They fit fairly tightly into the original old style, (2005/6) Land Rover 3 factory cup holders. The extra height provided by the containers can be an advantage. I have a similar assortment of containers in some of the door panel located wine bottle holders to better hold containers of lesser valued products.
|
|
arm rest fit270 viewsas you can see iv miged a plate on also
|
|
arm rest fit213 viewsthis is gary from trim-line... a job he knows to well as he is in landrover dealers most weeks..
|
|
arm rest fit234 viewsthe start of a long night.
|
|
arm rest fit262 viewsas you can see there is a hole where the arm rest fixing point gose... gives you a good guide.
|
|
Mitac Mio Cradle448 viewsMitac Cradle adapted to fit to L shaped bracket (remainder sits under rubber mat) Allows PDA to be quickly removed when leaving the car unattended.
|
|
Tapa-circuit388 viewsTapa-circuit fitted to fuse box behind glove box. Red cable to top is the fused output cable leading to the PDA charger
|
|
Tapa-Circuit Fuse Tap411 viewsTapa-circuit fuse tap fitted in existing fuseway provides extra fuseway which I have used to hard wire my Tomtom Sat Nav PDA. The fused output feeds into a female socket (Cigar lighter sized) into which the tomtom power adaptor is plugged. All hidden away behind the glove box.
|
|
Tapa-circuit Fuse Tap435 viewsTapa-circuit fuse tap fitted in existing fuseway provides extra fuseway which I have used to hard wire my Tomtom Sat Nav PDA. The fused output feeds into a female socket (Cigar lighter sized) into which the tomtom power adaptor is plugged. All hidden away behind the glove box.
|
|
DDin Xtron kit first fit - slight adjustments needed top and bottom.103 views
|
|
Defender 19 viewsDefender showing trailair camera fitment
|
|
Defender28 viewsDefender with adjustable tow bar with TrailAir fitted
|
|
Defender22 viewsDefender with adjustable tow bar showing trailair camera fitment
|
|
Deka Battery Dimension Data615 viewsThe battery size that I installed for my auxiliary was a BCI 40R battery as it was for me the easiest to fit and was also a cranking battery. The case profile was such that no tie down fins were located on either bottom end, (sides yes), and length wise, it was only about 11" (290 mm) long. As such, I did not have to grind the nibs at the front bottom of the plastic surround.
I did however raise the bottom of the battery above the angled nibs as I set the battery on a 1" (25mm) high plastic spacer. The total height, (battery plus spacer), was about 8" (200mm) so the battery top still fit under the Land Rover factory cover.
For the Aux battery, when I replaced the 40R, I installed an Interstate BCI 47 which is similar in size to a DIN H5. I was therefore able to eliminate the vertical spacer as the Group 47/H5 is the same height as the DIN H7/H8 stock LR spec starting battery. As such, the standard battery tie down bolts can be used without modification. The Group 47 battery is 9 11/16" long x 6 7/8" wide x 7 1/2" (190mm) high.
|
|
Cooling System - Description and Operation 4.0L and 4.4L petrol engines 5 pages1028 viewsThis is a 5 page pdf that provides some insight into how the coolant flows thru all the hoses. Of interest is the paragraph,(page 3/5), that attempts to explain how and why the thermostat is designed to open at different engine operating temperatures - in brief, the reason for the spaghetti tangle of small hoses on the top of the engine.
There is also reference to an engine oil cooler that I gather cools something I think related to a supercharger, if fitted.
|
|
ronaldo transcends tight vest83 viewsThe brazilian football team have requested a new outfit after complaints about tight vests
|
|
Thread upload17 viewsImage uploaded in thread 170233
|
|
Thread upload21 viewsImage uploaded in thread 170233
|
|
Awning156 viewsStud bolt fitting slot in rib.
|
|
338 viewsCentre seat removed, fridge fitted & my al cheepo seat covers.
|
|
Another photo of the D3 & caravan outfit ... this time using the Mitchell Bros towbar and Hayman Reece WDH (May2008)126 views
|
|
190 viewssignal wire pin 3 on rear of D4 rear light plug fit 6 ohm 50 watt resistor across here and common ground Pin 5 yellow terminal shown in next pic
|
|
71 viewsBadges removed from bonnet and fitted to a bar
|
|
Thread upload10 viewsImage uploaded in thread 176264
|
|
Lower arm fitting instruction152 views
|
|
Disco 4 HDI DRL130 viewsDRL Lams fitted to D4
|
|
70 views
|
|
Driving Lamp Brackets - Fitting66 views
|
|
Driving Lamps - Fitting75 views
|
|
clearout driving light fitting kit6 views
|
|
Thread upload7 viewsImage uploaded in thread 204949
|
|
6 views
|
|
King Springs Lift331 viewsSpring Lift and Safari snorkel fitted
|
|
Dual Battery and ECU Chip175 viewsDual Barrery System by Traxide and Optima Yellow Top battey, Plus ECU Chip being fitted
|
|
Disco 3 - 21 December 2012165 viewsJust back from having Front & Rear Bar, Compressor and Snorkel fitted.
|
|
ARB CKMTA Twin Compressor180 viewsTwin Compressor with Manifold and Airtank. Tight fit but it fits. Also the ECU Chip is at the back and below up against the battery case.
I changed the hose quick release to a standard Air Hose Fitting eg like a workshop would use. My other truck has those also.
|
|
Green Cotton Air Filter fitted to Audi Coupe Quattro 2.8 V648 views
|
|
HK Drive + Play: Temporary Fit600 views
|
|
Screen profile437 viewsNote that the passnger airbag is switched off when the screen is fitted - no problems to date with solar gain on the rear of the screen
|
|
Drawers and fridge slide21 viewsDrawer system fitout
|
|
Babu - great guy from Mozambique who joined Kingsley\'s core team.158 views"How the heck am I gonna fit all that in there?!"
Packing all the kit in Ondangwa. Amazing what you can get into a Defender!
|
|
fitting the wippacs83 viewsdin rail, so many uses.
|
|
Got tinted glasses made today329 views looks like factory made, perfect fit
|
|
Fits a treat174 views
|
|
Mantec Plate fitted225 views
|
|
Fitting mudflap181 views
|
|
Fitting mudflap262 views
|
|
New Wood Dash and Retro-Fit Leather Seats109 views
|
|
Alarm fitted in suggested location for the circuit breaker - will either velcro-fasten to the alarm or find alternative location88 views
|
|
OEM sidesteps as fitted when purchased19 views
|
|
![DSCF0060[1].jpg](albums/userpics/12896/thumb_DSCF0060%5B1%5D.jpg "Filename=DSCF0060[1].jpg
Filesize=148KB
Dimensions=1280x960
Date added=29.Jan 2008")
kaymar side pictures90 viewsincorrect fitting of rear bar
|
|
New Disco 3 stickers fitted196 views
|
|
The Disco ready for scruteneering247 viewsNew recovery points fitted, ground clearance 355mm
|
|
phone fitting on steering wheel17 views
|
|
425 viewsRemoved the ARB bull-bar and refitted the original front bib (but now with two additional recovery points fitted to the modified ARB mounting brackets).
|
|
Telephone control fitting for steering wheel28 views
|
|
Telephone control fitting for steering wheel ( rear )24 views
|
|
Damaged area66 viewsPic shows plastic breather fitting with the corner ground away. When tank reached full fuel is pushed out under forecourt pump pressure. The second occurrence shows similar damage.
|
|
Hidden winch mount with winch in place125 viewsHydraulic hoses are now installed. Note notch for hydraulic:electric solenoid to fit in mount.
|
|
Close-up front view of partially-installed winch121 viewsNote that the sheet-metal flange just above the winch had to be notched to allow winch controller to be actuated. Also this same bracket had to be bent upwards to allow the winch hydraulic:electic solenoid to fit without rubbing. The nut on the upper-left bolt (the one with a very faint circle around it) stripped on re-installation, so the tray and winch pulling load is held only by the threads on 7 bolts....
|
|
Window fitting180 views
|
|
Mirror fitting206 views
|
|
Detail of hydraulic hoses attached to power steering hoses155 viewsHoses are attached to the upstream side of power steering rack. When winch not running, PS rack sees full pressure (ie, no change from design). Biggest challenge is running stiff hoses so that they align with attach points. I got Qantas employee who repairs hydraulic baggage loaders to braise in fittings (very tight spaces and tough access).
|
|
Winch as installed177 viewsLicence plate is held on by winch cable and 4 metal pins which fit into modified bumper body. Winch rope is green
|
|
Ammended (neater) fit for the Garmin521 views
|
|
Carpet/mat screw fittings ( enough for two carpets/mats 038 views
|
|
T-trax fittings.20 views
|
|
fitted tyre 418 views
|
|
adhesive tape fitting246 views
|
|
fitting window strip291 views
|
|
maxxraxx fitting - showing electrics now accessible!400 views
|
|
maxxraxx fitted347 views
|
|
Maxxraxx fitted and loaded434 views
|
|
Lintran Dog Box. Snug fit!240 views
|
|
Fitting towbar electrics455 viewsFitting towbar electrics - connectors already in use!!!
|
|
Fitting tow bar storage unit477 views
|
|
Fitting tow bar storage unit508 views
|
|
With Mantec tray fitted302 views
|
|
31 viewsSpare wheel never fitted with unused 255/60 x 18 112v
|
|
28 viewsSpare wheel never fitted with unused 255/60 x 18 112v
|
|
Warn number plate screws/fittings206 viewsPart no. of Warn fitting used to attached number plate to Warn winch carrier.
|
|
New tyres and undrbody armour fitted229 views
|
|
New one fitted81 views
|
|
fits on exsisting holes that are already there,realy easy to fit182 views
|
|
194 viewsRight front showing rough fit of the slider
|
|
183 viewsRough fit showing the rear end with the support channel and slider plates.
|
|
New Boots fitted to both CV joints102 views
|
|
143 viewsraised susspension - this i bought from the factory, so I assume you could order a trailer with this fitted. only necessary if you are fitting big tyres like I have. the axle is a standard alco axle which I ordered from alco with blank hubs. hubs were machined to accept LR studs. Wheel centres had to be slightly machined to fit over bearing caps
|
|
fitted stronger rear strut holders. not a great mod. the holes i drillled for the "R" clips are the best mod, as they stop the legs from sliding up under pressure. requires bracing inside to stop chassis bending103 views
|
|
Fitted "echo" drawers in one of the front doors. an almost perfect fit, just a little sheetmetal work needed. the cho guys would probably vomit if they saw this107 views
|
|
121 viewsthis shows the fridge on the 2 x 180kg sliders. i had to slightly modify the door opening to fir the fridge hinges thru. I just gently bent it, and fitted additional seals, hence it can easily be returned to standard. having the fridge in the kitchen is a major bonus, plus the back door of the trailer is now used for easy access to the cavernous interior, whereas prior to this youhad only access thru the front doors, which are only 500mm wide
|
|
MTR Tyre fitted to G4 cars419 views
|
|
dust cover on30 views
|
|
DVD / RSE Retrofit Guide139 views
|
|
DVD Player63 viewsVeba DVD Player fitted into top glove box, AUX in for connection of Ipod, Games COnsoles etc. Remote control with sensor mounted by rear view mirror.
|
|
First Night709 viewsfor more than 10 years I'm using my roof tent on a lot of different cars (Mitsubishi L300, Mitsibishi L200, LR 110 Td5, Disco 2 Td5).
Now, on last friday I finished to fitt the tent of the original LR Expedition roof rack.
It was a hard job because I wont neither to change the possition of the GPS antenna nor I was interessted to fitt a second one.
|
|
FIFITH ELEMENT 87 views
|
|
EGR Stub Pipes13 viewsThis what they looked like after 15K Km
Glad I fitted the Blanking kit
|
|
Leopard21 viewsLR prototype electric vehicle - game viewer with TrailAir fitted
|
|
Vibration-proof Engel Power takeoff fitted122 views
|
|
Vibration-proof Engel Power takeoff fitted132 views
|
|
Thread upload4 viewsImage uploaded in thread 200938
|
|
18 viewsNewly fitted
|
|
CALENDAR 2008 ENTRY692 viewsSpot the Disco! (Fitz Roy, Argentina)
|
|
Thread upload2 viewsImage uploaded in thread 198328
|
|
Won\'t fit in the garage anymore124 views
|
|
Thread upload15 viewsImage uploaded in thread 122403
|
|
Water Filter Location263 viewsThe water filter (if youy have one) might be fitted adjacent to the water pump connection
|
|
48 views
|
|
57 views
|
|
64 views
|
|
58 views
|
|
57 views
|
|
76 views
|
|
Thread upload12 viewsImage uploaded in thread 161369
|
|
147 views
|
|
DVD / RSE Fitted103 views
|
|
Thread upload8 viewsImage uploaded in thread 200461
|
|
fitted tyre 322 views
|
|
fitted tyre 219 views
|
|
fitted tyre 120 views
|
|
winch fitted at home in about nine hours 242 views
|
|
204 views
|
|
151 views
|
|
140 views
|
|
146 views
|
|
133 views
|
|
137 views
|
|
138 views
|
|
130 views
|
|
141 views
|
|
132 views
|
|
136 views
|
|
147 views
|
|
144 views
|
|
144 views
|
|
147 views
|
|
144 views
|
|
167 views
|
|
148 views
|
|
229 views
|
|
220 views
|
|
234 views
|
|
245 views
|
|
205 views
|
|
207 views
|
|
237 views
|
|
241 views
|
|
220 views
|
|
213 views
|
|
202 views
|
|
502 views
|
|
485 views
|
|
341 views
|
|
Thread upload4 viewsImage uploaded in thread 177483
|
|
Thread upload4 viewsImage uploaded in new thread
|
|
Thread upload0 viewsImage uploaded in thread 198328
|
|
The full story how I fitted RSS seats in D3520 views
|
|
Fitting Instructions251 views
|
|
Front Fender Moulding Removal & Fitting.pdf315 views
|
|
Front Lamp Guards Fitted204 viewsThe hardest part was extracting the front grill from behind the nudge bar and driving lights!
|
|
Front Light Guards Fitting74 views
|
|
Thread upload26 viewsImage uploaded in thread 99417
|
|
New fliter fitting202 views
|
|
New filter fitting246 viewsTemp fit
|
|
New filter fitting220 views
|
|
New filter fitting216 views
|
|
New filter fitting222 viewsSTD filter in place.
|
|
New filter fitting200 viewsSTD filter removed, position of piping.
|
|
fuel angel187 viewsfuel angel pictures
|
|
Thread upload5 viewsImage uploaded in thread 180233
|
|
Leopard23 viewsRear view of game viewer ( defender electric vehicle ) with trailair camera fitted.
|
|
223 viewsDesign of 18" rim to fit D4 3.0 ltr
|
|
General Grabber AT94 viewsFinally got the 255/55/19 TAs fitted.
|
|
D44 Tank Guard Fitted 148 views
|
|
D44 Tank Guard Fitted 247 views
|
|
Gulp! - All this has got to fit in!159 views
|
|
389 viewsconcept for Hayman Reese tow bar - bolts on inside bumper channel - need to remove bumper to fit - won\'t work with tyre underneath - concept only - but will be building prototype week of 9/7.
|
|
Drive & Play149 viewsFitted the screen using a piece of laminate flooring fibreboard underlay & cutting up a 3.99 leatherette cushion, looks like it was fitted from new
|
|
Retro fitted Headlamp Washer Relay Rewiring Circuit Diagram301 views
|
|
Thread upload15 viewsImage uploaded in new thread
|
|
Reversing camera sat nav land rover instructions hids4u506 viewsReversing camera retrofit on land rover lexus jaguar and many other cars. Display image on the sat nav lcd screen
|
|
Armrest Fitting116 views
|
|
Driving back home, we stayed in a nice little castel before going to Solihull. D3 fits the place, doesn\'t it ?497 views
|
|
Back of unit shows choice of port for best fit94 views
|
|
OE cut dash with display fitted - showing where to cut76 views
|
|
Rear Spoiler Fitting Instructions LR131 views.
|
|
Car seat fitting96 views
|
|
Disco with DRL182 viewsDisco 4 with DRL's fitted
|
|
35 viewsThe facia had some bits sticking out which fit quite nicely with the supplied double DIN support. As I was going to use the DIN supports supplied with either the radio and the CB, I needed to remove those bits sticking out. They made the DIN support bend as well.
|
|
48 viewsI still needed to cut some small bits away from the DIN in order to have the facia cover fit nicely.
|
|
A Victorian Railways D3 Class Locomotive.248 viewsThe 5\'2\'\' gauge of Victorian Railways (Australia) fits a D3 perfectly.
Taken at grain handling facility at Moolert Victoria.
|
|
Completed and fitted272 views
|
|
Side steps fitted 79 views
|
|
safari outfit 201417 views
|
|
scrape ya bum30 viewsmaybe should have fitted sump guard here
|
|
New outfit94 views
|
|
Mantec Plate Fitted264 viewsPlate fitted, Friday 20th July 2007
|
|
90 tonnes Press from somewhere to somewhere else !!!92 viewsCannot say too much about this as i will have to kill everyone !!!
The Heavylift Ship is fitted with a single 300t derrick,
|
|
Perfect Fit For Front Cup Holders98 views
|
|
After removal of H-panel95 viewsCrikey, you have to pull HARD to remove this trim!!! Broke one clip and only lost half of it. Fit back with 3 clips ok. Yet to drive it to see if it rattles.
|
|
Prospeed rack and sliders fitted41 views
|
|
My new 13my112 viewsHatchbag, rear door protector and seat covers fitted :)
|
|
Fitted compilation15 views
|
|
My new 13my156 viewsHatchbag, rear door protector and seat covers fitted :)
|
|
Fitted8 views
|
|
| 759 files on 2 page(s) |
 |
1 | |
|
