Last additions - Car mods |
Stand off tubes214 viewsMy rock sliders and stand-off tubes in action10 Feb 2010
|
|
186 viewsGMAX forged rim in 20" version01 Dec 2009
|
|
222 viewsDesign of 18" rim to fit D4 3.0 ltr01 Dec 2009
|
|
322 views15 May 2009
|
|
411 viewsLower front bib is removable via two bolts, for increased approach angle27 Feb 2009
|
|
425 viewsRemoved the ARB bull-bar and refitted the original front bib (but now with two additional recovery points fitted to the modified ARB mounting brackets).27 Feb 2009
|
|
new alloy sliders267 viewsNew 6mm sliders + stand-off tubes in 6mm alloy15 Feb 2009
|
|
new alloy sliders 1259 viewsNew 6mm sliders + stand-off tubes in 6mm alloy15 Feb 2009
|
|
Opposite Lock spare wheel carrier739 views04 Oct 2007
|
|
Opposite Lock spare wheel carrier + Dynamic 4x4 steel 17" wheels744 views04 Oct 2007
|
|
752 viewsNew control rod is carbonfibre/fibreglass hollow tube, with a rubber grommet fitted to one end (screwed and epoxy-ed) and steel rod bent into shape at the other (epoxy-ed).27 Aug 2007
|
|
650 viewsNote blue rubber collar to hold lower part of control rod in arm.27 Aug 2007
|
|
718 viewsFront height sensor - original is behind sensor arm, the new one is in the foreground.27 Aug 2007
|
|
801 viewsview of front SSR tyre01 Aug 2007
|
|
768 viewsview of rear tyre01 Aug 2007
|
|
914 viewsInterco SSR 32.5" tyres fitted, car at new std height (+40mm)01 Aug 2007
|
|
1027 viewsInterco SSR 32.5" tyres fitted, car at new off-road height (+40mm)01 Aug 2007
|
|
1143 viewsInterco SSR 32.5" tyres fitted, car at new off-road height (+40mm)01 Aug 2007
|
|
New compressor plate739 viewsFitted between the chassis rail and the new sill protector.03 Oct 2006
|
|
Repositioned compressor bracket735 viewsThe bracket was snapped in two, so I had it re-welded and slotted out the mounting holes so that it could be positioned 10mm higher (no longer protrudes under the chassis rail)03 Oct 2006
|
|
Steel compressor plate682 viewsIgnore my crappy welding attempts - I got a friend to finally weld the locator tab on the front!03 Oct 2006
|
|
Sill protectors 2735 viewsThe side protection bar comes out a good 170mm. Prevents side panel damage and car-park knocks! Still deciding whether to fit the chequerplate tops, as originally designed.03 Oct 2006
|
|
Sill protectors796 viewsThese replace the plastic sill protectors. 4mm mild steel plate, bolted through the existing holes in the side and underside.03 Oct 2006
|
|
Compressor cover damage754 viewsAnother shot of the hole in the plastic cover03 Oct 2006
|
|
damage to compressor cover754 viewsHit a rock in Harvey and lost the compressor function. Went straight through the original plastic cover.03 Oct 2006
|
|
Compressor original cover656 viewsThe rock punctured straight through the plastic cover, snapped the soft compressor bracket and tore open one of the loom plugs.03 Oct 2006
|
|
|
|
|