| Last additions - Traxide Dual Battery System |
91 viewsBattery clamp needs to be modified due to the mouldings on the battery top to the side terminals. All that is needed is to cut off the bit as seen.29 May 2011
|
|
115 viewsModified battery clamp test fitting on battery.29 May 2011
|
|
131 viewsBattery clamped down, terminals and cables attached29 May 2011
|
|
131 viewsAll done. Added some cable sleeving to avoid cables rubbing against battery clamp29 May 2011
|
|
111 viewsBattery to battery cable in main battery box29 May 2011
|
|
113 viewsBattery to battery cable attached to main battery29 May 2011
|
|
125 viewsOptima Yellow Top in battery box. This is the version with side terminals so there will be some modifications to be done to fit29 May 2011
|
|
112 viewsDue to the side terminals protruding out the side and affecting the battery clamp, I found the battery will fit better if it could be pushed a few millimeters towards the engine. This lip will have to be removed.29 May 2011
|
|
89 viewsLip removed29 May 2011
|
|
103 viewsEarth stud with earth cables attached29 May 2011
|
|
99 viewsCircuit breaker mounting location. Mounted with industrial velcro29 May 2011
|
|
114 viewsBattery to battery cable in place along edge of engine bay29 May 2011
|
|
120 viewsModified aux battery box cover with shape of battery to battery cable. I also removed the tab which was fouling my traxide brain mounting bolts.29 May 2011
|
|
97 viewsBattery to battery cable tied to edge29 May 2011
|
|
106 viewsPower cables passed through grommet29 May 2011
|
|
119 viewsCircuit breaker at other end of power cable29 May 2011
|
|
110 viewsBolts through the plastic box. These function as studs for the traxide brain to be mounted to.29 May 2011
|
|
132 viewsTraxide SC80 brain modified. Cut the studs down to the nuts and removed the rubber cover. Had to do this as otherwise it wouldn't fit comfortably and would squash the brake vacuum pipe29 May 2011
|
|
122 viewsTraxide brain mounted. It's mounted slightly tilted towards the front of the engine bay so as to give as much space as possible to the brake vacuum pipe behind it.29 May 2011
|
|
101 viewsRemoving dash undertray29 May 2011
|
|
103 viewsLooking for the grommet29 May 2011
|
|
106 viewsGrommet found behind soundproofing29 May 2011
|
|
93 views29 May 2011
|
|
92 views29 May 2011
|
|
Traxide SC-80 brain147 viewsTraxide SC-80 brain01 May 2011
|
|
|
|
|
|
|
