| Last additions - Fitting standard 3.5mm headphone plug/socket extension |
101 viewsexisting slot in top side of glove box used.19 Apr 2009
|
|
115 viewsHeat shrink tubing "fixed" in place19 Apr 2009
|
|
115 viewsHeat shrink tubing "fixed" in place19 Apr 2009
|
|
101 viewsstandard 3.5mm headphone plug/socket extension 19 Apr 2009
|
|
110 viewsview of wires inside dash (from where plug was removed). I ran them through the pre-existing slit in the top of the glove box to wiring loom connector.19 Apr 2009
|
|
98 viewsPlug removed from left hand side of dash to locate wires from clove box19 Apr 2009
|
|
105 viewsextended wire running from glove box to loom connector.19 Apr 2009
|
|
113 viewswire extensions after soldering with heat shrink tubes.19 Apr 2009
|
|
105 viewswire extensions after soldering with heat shrink tubes.19 Apr 2009
|
|
110 viewswire extensions after soldering with heat shrink tubes.19 Apr 2009
|
|
|
|
|
|
