| Last additions - Alternator D3 |
Generator_Removal.54 views01 May 2012
|
|
60 viewsOne bolt is visible at the front, but the other two are down the left hand side and best accessed by removing the small plastic guard behind the bumper. I also removed the small metal radiator guard between the bumper and the main sump guard (but that was mostly to retrieve the spanner I dropped!). The only issue with removing the plastic guard is the stupid plastic clips that hold it on may need to be replaced.31 Mar 2012
|
|
55 viewsspecial tool for fan removal.
36mm31 Mar 2012
|
|
39 viewsThis is a Left Hand thread, so it undoes by turning in a Clockwise direction.31 Mar 2012
|
|
47 views'Special Tool' to hold the fan drive in place31 Mar 2012
|
|
48 viewsYou will need to hold the fan drive in place whilst you undo the large nut in oder to remove the fan. This is a Left Hand thread, so it undoes by turning in a Clockwise direction.31 Mar 2012
|
|
67 viewsThis is easy to remove. You will notice the tensioner at the bottom left near the alternator. There is a sqaure slot on the tensioner into which fits a 3/8" square drive. Just turn anti-clockwise and the tensioner is moved away to slacken the belt and off it comes.31 Mar 2012
|
|
47 views31 Mar 2012
|
|
50 views31 Mar 2012
|
|
|
|
|
|
|
