| Last additions - LR Expo Mods - Light Brackets and Floor |
Neoprene Skirt on G4 Rack - Outside342 views22 May 2008
|
|
Neoprene Skirt on G4 Rack - Inside311 views22 May 2008
|
|
Light Bracket Pic328 views08 Jan 2008
|
|
Expo Rack Light Bracket268 views08 Jan 2008
|
|
G4 Roof Rack385 views04 Dec 2007
|
|
Pattern for Expo Roof Rack Floor Sheet397 viewsI used a 3mm sheet of Aluminium - with 150mm wide Grip Tape to do the Chevron Patter to make it a bit safer. Note the sheet is 1610mm long, 1100mm wide at the front and 1060mm wide at the back. I drilled 3 rows of 5x 12mm holes - one row down the centre and one either side 30mm in from the edge. The hole centres being at 31mm from the front edge, next 420mm from 1st hole centre, the 375mm from 2nd hole, 372mm from 3rd hole, 375mm from 4th hole, leave 31mm to the back edge. Edited May 2008: I've subsequently cut the sheet in half lengthways to make removal and fitting easier as I found the sheet increasing noise and reduces MPG considerably.26 Nov 2007
|
|
|
|
|
|
