Liston
Member Since: 28 Apr 2011
Location: Sussex
Posts: 24
  
|
I have a problem with the off/side head lamp not dipping all the time, I have replaced the n/s front ride level sensor as this was faulty which I thought may affect the dip motor on the lamp, but no diffrence. any one had same problem and got the answer, No fault codes on the computer when pluged in.
|
 28th Sep 2011 10:37 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Sometimes they just stick. Vigourous exercising of the shutter soemtimes cures it, otherwise it's a new headlamp unit really.... Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 28th Sep 2011 10:41 am |
|
|
Liston
Member Since: 28 Apr 2011
Location: Sussex
Posts: 24
|
When you say Vigourous exercising do you mean just switching on off or do you mean removal of the lamp on the bench ?
|
| 28th Sep 2011 10:52 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Flashing hi to low and back lots of times (try not to do this on the road....  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 28th Sep 2011 11:09 am |
|
|
Liston
Member Since: 28 Apr 2011
Location: Sussex
Posts: 24
|
Hey thanks for the tips. Put lamp unit on the bench worked out how it all worked and got dip shutter to move alot. Put back onto D3, but still no change, So gave the lamp unit a got slap and then all was well again. Did as you said many times and every thing seams tickety Boo  . Thanks. Must have been just a small bit of corrosion on the shutter hindge. 
|
| 28th Sep 2011 11:58 am |
|
|
