D3DAN
Member Since: 03 Dec 2010
Location: oxford
Posts: 137
|
Ok, I am trying to resolve a SRS problem I have, I have been checking connections for water ingress, I have removed the BCM from behind the dash and foun a wire 'floating'. It is a thin Grey wire, it is twisted together with a red wire, the wire comes from the main loom which comes from behind the dash on the floor, the red one goes under the carpet (from what I can see I will remove carpet later). and the grey one is just floating? not connected to anything and looks like it has pulled from a connector (the last 3-4mm is stripped) I have checked all connectors and there is no sign of a wire/terminal missing?
So does any one know what these Grey and red thin wires twisted together do? I will post a picture later of the area (n/s/f footwell)
Thank you
Dan
|
 7th Jan 2011 10:02 am |
|
|
D3DAN
Member Since: 03 Dec 2010
Location: oxford
Posts: 137
|
Just to let any one know, who may come across the wire.
Not to worry was reading on GTR that they sent a notice out saying that the wire was there on some vehicle it is taped in loom and some it floats about with a stripped end. It is an unused wire, it something to do with seat electrics but not needed. It can also be found in the O/S/F according to the notice.
Dan
|
| 8th Jan 2011 6:37 pm |
|
|
