| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
wanborough one
Member Since: 28 Aug 2021
Location: Swindon
Posts: 56
  
|
| [Wanted] Ignition switch and assembly with key D3 |
|
Hi All
Has anyone got a one of these in good condition at a reasonable price. Mine is so worn if you touch the key when running it turns off!
I know there are quite a few on fleabay but want one that is in good condition and can be vouched for by a forum member  .
Thanks
|
 2nd Jan 2022 7:19 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
I'm not sure its as easy as that, does the key not sync with the immobiliser and loads of other electrikery
|
| 2nd Jan 2022 7:29 pm |
|
|
|
|
desv8
Member Since: 01 May 2020
Location: CHELTENHAM
Posts: 124
|
I have a spare ignition lock and blade that you are welcome to try. Although I have no switch which is most likely the issue. Easy enough to check just take the steering column cover off and the black switch just unclips from the bottom of the lock. Wear will be easy to identify.
I think as long as you don't change the immobiliser ring the lock and switch should be a straight swap.
I bought a complete switch and lock set including passenger lock from Gentlemen of Salvage, £45 from memory, couldn't fault them.
|
| 2nd Jan 2022 9:47 pm |
|
|
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
Yassssssss finally got something right, was only a matter of time
2022 looking good so far 
|
| 2nd Jan 2022 11:25 pm |
|
|
desv8
Member Since: 01 May 2020
Location: CHELTENHAM
Posts: 124
|
I just changed the barrel, blade and switch with no issues.
Used original fob and immobiliser ring which I assumed were the elements that needed pairing to the car?
Am I wrong?
|
| 3rd Jan 2022 10:08 am |
|
|
wanborough one
Member Since: 28 Aug 2021
Location: Swindon
Posts: 56
|
Hi
Thanks for the advice, re just changing the barrel etc and using the existing ring thats what I thought you could do to avoid the added expense of the other parts, am I wrong here guys?
|
| 3rd Jan 2022 6:17 pm |
|
|
wanborough one
Member Since: 28 Aug 2021
Location: Swindon
Posts: 56
|
And thanks desv8 for the offer, I will wipe the cover off and have a look first as you suggest just in case its a loose connection as killing the engine just by put some pressure sideways on the key isnt something i have come across before.
|
| 3rd Jan 2022 6:22 pm |
|
|
desv8
Member Since: 01 May 2020
Location: CHELTENHAM
Posts: 124
|
I can only go from my experience. My problem was that the car was sensing the key in the ignition after locking and after a while setting off the alarm, usually at about 0300hrs. When i unlocked the car the display would say key in ignition (Without key in ignition). I bought a complete key and ignition lock set. Replaced the barrel and switch which resolved the issue. No pairing, just swapped out.
sounds to me that you have a similar issue, general wear rather than electrical. Maybe wear in barrel or switch??
As long as you are not changing the fob or immobiliser ring I can't see an issue, although again only from my experience.
Good luck with your investigations. 
|
| 3rd Jan 2022 8:59 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
