Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
Updating modules?
After doing a check with the Iid tool it states there are 12 modules that can be updated with later versions of firmware!
Does this mean the Iid tool can do this as it is without loading or buying these updates?
As I am happy with everything as it is apart from SStart not working(no fault lights showing) and I don’t know which module operates it, is it worth doing the upgrades?-i.e.risk involved.It can when others can't,
It will when others won't,
It goes where others don't.
11th Feb 2019 8:47 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5068
The latest firmware is available on the GAP site, Like you, I understand there is a risk of rendering a vehicle unusable! There is no cost associated that I am aware of, but you need to log into your account to download the firmware.
It would be interesting to know if anyone has had an issue after flashing, and the outcome!yµ (idµ - eAµ) ψ=mψ
11th Feb 2019 11:03 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
If it ain't bust........................... Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
11th Feb 2019 11:12 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5068
Yeah I know but curious as to the success or otherwise. yµ (idµ - eAµ) ψ=mψ
11th Feb 2019 11:19 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
There is a small charge. I think it’s about £25 but there is a couple free like the bcm and compressor.
11th Feb 2019 11:52 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5068
Ah yes I think you are right actually. Did you ever try it?yµ (idµ - eAµ) ψ=mψ
11th Feb 2019 11:57 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Nope, but that’s only because I follow Narpy’s notion. But I wouldn’t hesitate if I needed it knowing the support from Gap.
12th Feb 2019 12:01 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Hi
My turbo actuator didn’t have the self motor test when the landy was turned on and off to prevent it from sticking
I did update that module using the iid, did cost £25 and had no problems what so ever
Indeed I also wouldn’t have any hesitation of updating any other module if needed due to the fantastic backup service from Pat at Gap
Did do the 07 update as well when I first got my iid, next one I’ll do will be the California stop update , it will cost £25 but feel that’s a bargain considering Gap has taken the time to write a totally new code
Before I done that turbo update I had to send over my module details so they knew what software I had
Wouldn’t hesitate with other updates from Gap
Last edited by gstuart on 12th Feb 2019 8:41 am. Edited 2 times in total
12th Feb 2019 8:35 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132
Narpy wrote:
If it ain't bust...........................
Where’s the fun in that.
12th Feb 2019 8:37 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
This is for an MY14 with Stopstart which has never worked, there is a update for keyless locking for instance, another for hvac, gearbox,etc.
I have used the GAP fast track service before on the D3 without problems, the question I am asking is; am I missing something like the three flash indicators on the D3 or better security on the keyless entry? My way of thinking the software update hasn’t been done without good reason and is technically part of a main dealer service.
The Iid tool returns a search of 12 updates available, I guess the simplest way is to try and update one module as it is and see what the result is.It can when others can't,
It will when others won't,
It goes where others don't.
12th Feb 2019 9:16 am
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
gstuart wrote:
Hi
My turbo actuator didn’t have the self motor test when the landy was turned on and off to prevent it from sticking
I did update that module using the iid, did cost £25 and had no problems what so ever
Indeed I also wouldn’t have any hesitation of updating any other module if needed due to the fantastic backup service from Pat at Gap
Did do the 07 update as well when I first got my iid, next one I’ll do will be the California stop update , it will cost £25 but feel that’s a bargain considering Gap has taken the time to write a totally new code
Before I done that turbo update I had to send over my module details so they knew what software I had
Wouldn’t hesitate with other updates from Gap
Is the Californian stop update available now? This would be something I'd like to do if it isn't to hard..?
12th Feb 2019 9:18 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
Yes, that’s the one I updated, it was £25 and you can access it from the GAP website, you will need your vin number as they are vehicle specific, very good service you will receive in within 24 hours, not guaranteed to cure it though, it does contain other improvements in the gear change besides the California stop.It can when others can't,
It will when others won't,
It goes where others don't.
12th Feb 2019 9:25 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
SS is going to be your main battery issues
I was happy for it not to work til main battery dies in cold last Dec
now SS works the charm (also replaced ssecondary batt which only held 10.8V)
I would be interested in software updates as well on my bus but reading recovery procedure I would not take it on myself
G
12th Feb 2019 9:28 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8244
I have fitted a new small battery, main battery although original is showing all good, checked it numerous times and always shows over 12.7 volts, good thing I don’t get any fault lights on, I did when the small battery failed.
Nothing to be afraid of with the upgrade, it takes about 1 minute to install it, the gear changes are smoother, cruise control works far smoother on change down, no more taking off like a rocket on hills and hopefully Cstop gone.It can when others can't,
It will when others won't,
It goes where others don't.
12th Feb 2019 9:38 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Littlewill wrote:
gstuart wrote:
Hi
My turbo actuator didn’t have the self motor test when the landy was turned on and off to prevent it from sticking
I did update that module using the iid, did cost £25 and had no problems what so ever
Indeed I also wouldn’t have any hesitation of updating any other module if needed due to the fantastic backup service from Pat at Gap
Did do the 07 update as well when I first got my iid, next one I’ll do will be the California stop update , it will cost £25 but feel that’s a bargain considering Gap has taken the time to write a totally new code
Before I done that turbo update I had to send over my module details so they knew what software I had
Wouldn’t hesitate with other updates from Gap
Is the Californian stop update available now? This would be something I'd like to do if it isn't to hard..?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but curious as to the success or otherwise. 
