Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D3)

Handbrake shoe clips forever popping off?
Post Reply  Down to end
Page 1 of 1
Weedyapl
 


Member Since: 23 Sep 2015
Location: Melbourne
Posts: 81

Australia 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3
Handbrake shoe clips forever popping off?

Hey all,

Just had a question back in Sep 2023 i had the low speed squeal from rear wheels and as expected it turned out to be the old handbrake shoe clip had popped off.

Fixed and all good up until Aug 2024 I had my handbrake hardware (including new clips) replaced due to an issue with the old shoes sticking to brand new rear rotors which is now fixed but now a month later it appears that again one of the new handbrake shoe clips has popped off as symptoms are identical to Sep 2023.

I'm gonna check wheel bearings this weekend weather permitting so i can rule it out. But as before its highly intermittent and I can only hear it under 30kpmh.

Has anyone else had these things keep falling off?

Is there any advice anyone can give during installation to stop this from happening?

Is there a known problem with the new clips?

At my wits end!

Regards,

Aidan Aidan
=============  
Post #237775720th Sep 2024 9:57 am
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6311

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

Was the clips installed in the right direction, if not they can come off. The open end of the clip needs to placed with the wheel rotation.

Flack Thumbs Up  
Post #237776020th Sep 2024 10:04 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Weedyapl
 


Member Since: 23 Sep 2015
Location: Melbourne
Posts: 81

Australia 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Hey Flack,

Thanks for the response. Last Sunday I decided to check for myself.

I jacked it up and checked wheel bearing was good which it was.

Wheel was squealing so bad when i turned it I fully expected to see a clip had fallen off but both were in situ. Spinning it a bit more to try and pinpoint location of rubbing it disappeared after 5 or 6 additional rotations.

Confused I looked at clips again and realised the 9 o'clock clip (driver side rear) was installed by my mechanic upside down. The other clip was installed correctly. It's still in place but yeah wrong way around.

I just had a chat to him he doesn't think it would cause the squeak but every single installation video i have seen says to ensure you install them the right way around.

Do you think it's possible it could cause one of the shoes to intermittently rub on the disc if one clip is installed upside down?

I basically said to him I want it installed the right way around regardless of whether it fixes the rubbing or not. Today I'm gonna check passenger side as well to check those clips. Normally i leave brakes to the professionals but these days good mechanics are hard to find. Aidan
=============  
Post #237794322nd Sep 2024 10:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Weedyapl
 


Member Since: 23 Sep 2015
Location: Melbourne
Posts: 81

Australia 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Decided to check passenger side rear as well (the one with no sound) and both clips are installed correctly. I'm fairly certain it's the incorrectly installed clip causing the noise will get it fixed and report back as i didn't find anyone else having this particular issue when searching. Aidan
=============  
Post #237794423rd Sep 2024 1:55 am
View user's profile Send private message View poster's gallery Reply with quote
loanrangie
 


Member Since: 18 Jun 2017
Location: Melbourne
Posts: 705

Australia 2008 Discovery 3 TDV6 SE Auto Stornoway GreyDiscovery 3

Wouldn't it be just easier for you to do it ? saves a trip to the shop.  
Post #237794523rd Sep 2024 3:46 am
View user's profile Send private message View poster's gallery Reply with quote
Bicycle repairman
 


Member Since: 18 Sep 2019
Location: Cumbria
Posts: 188

United Kingdom 2010 Discovery 4 3.0 SDV6 GS Auto Galway GreenDiscovery 4

Check the backing plate isn't rubbing on the disc, the flat bit just above the PB shoes can rub on the disc as the backing plate expands with rust D4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3  
Post #237808224th Sep 2024 8:15 pm
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6311

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

The top spring can also be fitted the wrong way, check the spring is not rubbing on the bearing hub.


Flack Thumbs Up  
Post #237810525th Sep 2024 7:57 am
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site