Member Since: 22 Sep 2010
Location: Notts.
Posts: 8184
That's exactly why you are getting the fault codes, its looking for something that is not there, I get something similar because my EGRs have been blanked.
As Robbie says forget it unless you need to change the CCF and then disable rear aircon.It can when others can't,
It will when others won't,
It goes where others don't.
17th Oct 2015 4:21 pm
parrafin23
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
I have seen IIDTool throw up some faultcodes that are unknown on the D3. I had 1 fault last night, gave me ESF, plugged in the IIDTool and it came up with unknown.. I had to pull up the MSV-2 to figure out what it was, Diesel pressure to high.. I thought IIDTool had all the faultcode description sorted on it for the D3..
Mr.P
20th Oct 2015 4:14 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20805
Only in Beta I believe, and it may only be the Pro version.
Since my last firmware update, I have not seen any Unknown codes My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum