I cant comment on that bulb Steve, but I like a few others run the cool blue intense from Osram they are 8) so cannot see why these would not be taken up, a good price too Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
16th Sep 2013 4:14 pm
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
These bulbs are now in stock for anyone wanting to upgrade the standard HID unit - £50 each.
Member Since: 21 Jan 2013
Location: Plymouth
Posts: 394
SILVERSTAR HID D2S
Steve
Just went to order these, what's the postage charge that I need to apply there are a couple of variants on the site, the Osram offer is the cheapest, but free would be better
Cheers
Rob
14th Oct 2013 5:11 pm
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
Hi Rob
£2.75 is the Osram (and other little things) rate.
Member Since: 21 Jan 2013
Location: Plymouth
Posts: 394
Ordered
14th Oct 2013 5:33 pm
Broadsword
Member Since: 12 Mar 2013
Location: Hastings
Posts: 65
Are these a straight replacement on the D4 HSE?
Interested in these but just checking the fitment. Presumably a straight plug in too (not had to replace a xenon bulb yet)Brian - East Sussex
----------------------------
2009 (09) 10MY Discovery 4 HSE
Nara Bronze
Ebony Upholstery
Side steps
Tow bar
Surround Cameras
TV
Full floor mats
Heated steering wheel (!)
14th Oct 2013 5:45 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73079
Easy to fit D3s, NOT D4s. If I can do it, a drunk trained chimp on steroids can.
DSL wrote:
Just done mine, changing the HID bulbs was much easier than changing the high beam bulbs.
If anyone is nervous about it, worry not. If I can do it anyone ca.
Take off this cover, following the arrow,
Click image to enlarge
Twist the silver cap to remove it, though twist against the arrow as at first I didn't twig that lock means unlock the other way.
Click image to enlarge
Lift out the bulb after undoing the spring clip, mega easy access, and put the new one in same orientation then redo the spring clip (way easier said than done for the high beam).
Click image to enlarge
Fitting is the reverse of the above. Easypeasy.
Looking forward to heading out in the dark now.
Last edited by DSL on 14th Oct 2013 5:56 pm. Edited 2 times in total
14th Oct 2013 5:52 pm
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
Sorry they will not fit as the D4 runs D3S units with integrated ignitor
No D3S upgrade from Osram yet.Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
14th Oct 2013 5:54 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73079
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
