Member Since: 22 Feb 2006
Location: Doncaster UK
Posts: 184
Rasied Air Intake
OK now i know it's probably been covered before but...
what's the cheapest anybody's been charged for a raised air intake? my local stealer (Stratstone Doncaster)wants to charge me £377.00 including fitting and VAT
Cheers all'06 D3 HSE
Zambezi with Alpaca, F & R light guards, side steps, privacy glass, MTR's, rear access ladder, roof bars, RAI, walnut trim and a few other little bits and bobs
27th Feb 2007 1:24 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Give Nick at Yeovil a call. Forum members get a discount.
Also give Ryan a shout at our good sponsors Lakeland LR.
27th Feb 2007 1:28 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72967
Got mine done through Nick, good discount! Took longer than expected as tmine was the first & were being careful but they only charged me the specified time.
27th Feb 2007 2:18 pm
Mike
Member Since: 22 Feb 2006
Location: Doncaster UK
Posts: 184
Thanks guys
Lakeland worked out not muich cheaper than my local place.
However Nick at Yeovil although not much cheaper did offer a discount but more importantly was VERY helpful. So top marks there.
He is even emailing me a copy of the fitting instructions for the air intake.
so come on guys, who's fitted one themselves and how hard was it??
I mean how much damage can be done with an eejit a drill and a D3??? '06 D3 HSE
Zambezi with Alpaca, F & R light guards, side steps, privacy glass, MTR's, rear access ladder, roof bars, RAI, walnut trim and a few other little bits and bobs
27th Feb 2007 3:53 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
fitting takes about 30 mins, lots of masking tape and a sharp pencil helps you'll need a 'rivnut' tool though, draught excluder tape helps form a better seal against the wing too 8)
Pm me i know a good place .Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication [email protected] D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
27th Feb 2007 10:47 pm
Buckingham
Member Since: 08 Mar 2006
Location: Herefordshire
Posts: 958
Got mine for £51 off ebay and my local friendly Slimer fitted it for nuffink
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
you'll need a 'rivnut' tool though, draught excluder tape helps form a better seal against the wing too 8)
