Member Since: 20 May 2007
Location: west sussex
Posts: 804
starter motor removal
Looking for the best and easiest way to remove starter motor for when i come to replace timing belts in order to lock flywheel and replace the oil pump with modified one Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
6th Jun 2013 6:13 am
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1280
I spent many hours under the car trying to get my starter motor out. Finally I abandoned it, and went with the blob of paint concept on the front pulley when I did my belts.
I would be interested in how this comes out, as I couldn't find a way.
Cheers
John
6th Jun 2013 7:12 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I helped a mate of mine pull the starter motor and it took forever. Felt like we were disassembling the car and even then there seemed to be an almost impossible trick to get the thing out. The workshop manual was not a great help either.
Made a mental note not to try it again - one for my indie.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 20 May 2007
Location: west sussex
Posts: 804
John P wrote:
I spent many hours under the car trying to get my starter motor out. Finally I abandoned it, and went with the blob of paint concept on the front pulley when I did my belts.
I would be interested in how this comes out, as I couldn't find a way.
Cheers
John
Need to get the starter out to lock the flywheel as nut on crankshaft pulley needs to come off to change the oil pump to the modified one Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
