Renton
Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718
 
|
| O/S front height sensor calibration |
|
The O/S front height sensor gives a false signal to the 4x4 screen. When lowering to access height the white indicator above the wheel goes a fraction lower then the 3 others corners turning the white indicator into red. But the actual height is perfect.
I occasionally get a suspension failure upon a cold start which disappears after cycling the ignition. I also have an occasional airbag failure message.
Steering wheel is perfectly aligned and the wheels got an alignment not that long ago.
Did have the suspension arms changed recently.
Anything I can check or definitely a knackered height sensor? CLUB ILLEGAL CAR WASHERS
|
 5th Jun 2013 10:25 am |
|
|
markbrads
Member Since: 15 Apr 2013
Location: East Sussex
Posts: 234
  
|
| Re: O/S front height sensor calibration |
|
Unnecessary quote removed
Mine does this, red flashing square above front n/s wheel when lowered for access height, all other wheels have white blocks.
When it's at normal height all the square blocks are white, I thought it was because the way it was parked with that wheel on a slightly higher surface?
Does anybody know?
|
| 5th Jun 2013 11:12 am |
|
|
