dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
 22nd Apr 2013 2:27 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
  
|
Not having hands small enough to fit behind the bumper ..,I took the rear bumper off 
Some say it can be done without.... but  if I know how  Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 22nd Apr 2013 3:02 pm |
|
|
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
| 22nd Apr 2013 3:16 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
|
The wires will route without taking it off, I did that bit first before hitting the same problem you have 
i did think of using a cable tie for the plug and just forgetting the plastic jobbie too  Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 22nd Apr 2013 3:24 pm |
|
|
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
| 22nd Apr 2013 3:40 pm |
|
|
MarsKy
Member Since: 23 Dec 2011
Location: Lanarkshire
Posts: 847
 
|
dangerdave wrote:Out of interest, will it work okay without being enabelled?
Been towing my trailer without them enabled for the last few months.
All that happens is that it beeps and you switch it off manually if you want.
Although mine is just back from its 2nd year service and I got them enabled today (dealer forgot to do it when they put the tow electrics in).
And got new pads and brakes under warranty, and EPB done too (shoes covered but had to pay for pads though).
Seems to be a lot nippier too, especially pulling out of junctions 
|
| 22nd Apr 2013 4:51 pm |
|
|
dangerdave
Member Since: 23 Nov 2010
Location: <>
Posts: 4495
|
Admin note: post content removed at user request
|
| 22nd Apr 2013 5:31 pm |
|
|
Triumph_Dave
Member Since: 28 Feb 2013
Location: Somerset
Posts: 49
|
Hi Dave, let is know how it goes with the wiring.. Believe it or not I have to do the same job in two weeks time ..
Have you fitted your rear camera yet?.
dave
|
| 22nd Apr 2013 8:01 pm |
|
|
