Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Mega-screw awning pegs...
Has anyone used these? Often the hardest bit putting up the awning is hammering all the pegs into a hard standing pitch! Do they work, and more importantly, do they last without bending?
Member Since: 18 Mar 2006
Location: in the rhondda valleys
Posts: 945
Got some after easter , comes with a cordless attachment , so don't forget it and use it don' t try to hammer them inPractice safe eating - always use condiments.
2 Too many seats now
No trouble so far
tow pack, tasmods sills
IT goes without saying that you should never have more children than you have car windows
no Gareth whay you need is some of these
Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
15th Oct 2012 7:36 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
Agreed, you don't as much hammer them in as threaten the ground with them!!
15th Oct 2012 7:37 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Problem is Ray, they look like they need a big hammer to drive them in! I was hoping to be a lazy git and use my cordless drill to peg out.
no Gareth a rubber mallet dos well o ps they come in black toHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
15th Oct 2012 7:52 pm
Big red 999
Member Since: 18 Dec 2010
Location: stockport
Posts: 62
Screw pegs
used for over 5 years great
Ian
15th Oct 2012 8:23 pm
Madrunner
Member Since: 23 Oct 2011
Location: Dorset
Posts: 391
Those look like tooth picks - I bent up some 12mm diameter stainless pegs, 12" long with a gnarly point on the end.
They muller through any rocks or hard ground, secure the awning in any wind.2013 Evoque
15th Oct 2012 9:07 pm
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
Often thought about it but never tried - perhaps wil be my secret purcahse at this years NEC. Tomorrow !!
15th Oct 2012 9:14 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
Gareth I tried the screw pegs, they are fine in soil but proper hard standings even with a 24volt drill are a pain in the . I just use a club hammer and rock pegs, Ray's look like they would be good.DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
15th Oct 2012 9:28 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Ok, maybe I should stick with the lump hammer, good exercise I suppose
15th Oct 2012 10:32 pm
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4316
What about using Concrete screws. OK they do not come with the fancy plastic head but are designed for concrete
You might just need to find long ones.
Brendan
15th Oct 2012 10:38 pm
Frapp
Member Since: 19 Dec 2008
Location: Norff Zummerzet
Posts: 1655
I use long decking screws from Travis with a large washer, they come with the drill attachment in the pack
1/10th of the price of the fancy ones Member of the carrot crank club
Embarrassingly in for the 2nd round, bought another two
D3 Jack Russell carrier
D4 Landmark for towing duties
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
. I just use a club hammer and rock pegs, Ray's look like they would be good.
