Member Since: 18 Jun 2008
Location: Portsmouth
Posts: 60
Are there any 16" rims that fit a Disco 3?
Hi All,
I'm looking for a set of MT tyres for the Disco, but all most all are 15-16 inch. I did a search, but couldn't find a definitive answer. So has anyone fitted 16-15" wheels, or do the brakes etc foul.....
Thanks
This post has been edited by the site administration team
Moved to " Wheeeeels and Tyyyrrrees"
22nd Sep 2012 7:51 am
cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
Have 17" and its pretty tight cant see how you could get 16" or 15" onIDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
no no no they wont fit Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication [email protected] D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
22nd Sep 2012 8:34 am
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2573
ISTR someone in australia found some once?
I wondered whether D2 steel wheels could (be made to) fit?Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
22nd Sep 2012 9:04 am
bulldocer
Member Since: 17 Jan 2010
Location: spain
Posts: 68
hello,
YES, they fit. the bullface 16x8 ET-20. I had it in 285/75/16. I dont recomend it because it is ET-20, and the original is ET54, there is 7,5 cm width each side. You wont have problems of breaking mechanic, but the suspension works worse than before.
tha best is 17" with 3 cm spacer.
I have now 33x12.5R17 and 3cm spacers and it is PERFECT!!
26th Sep 2012 11:22 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Good lord.Land Rover - Turning Drivers into Mechanics Since 1948
Why not go for 17" that fit fine, loads of tyre choices and plenty of rims around on eBay and elsewhere...____
Gone: 10MY L320 RR Sport HSE, Ipanema Sand
Gone: 20MY Jaguar iPace HSE, Silicon Silver
Gone: 17MY RR Evoque SE Tech, Loire Blue
Gone: 08MY Discovery 3 XS, Stornoway Grey
Gone: 07MY FFRR TDV8 Vogue, Stornoway Grey
27th Sep 2012 11:36 pm
Robbed666
Member Since: 18 Jun 2008
Location: Portsmouth
Posts: 60
No problem. It's what I did, I got a set of nearly-new D3 17" rims off eBay.____
Gone: 10MY L320 RR Sport HSE, Ipanema Sand
Gone: 20MY Jaguar iPace HSE, Silicon Silver
Gone: 17MY RR Evoque SE Tech, Loire Blue
Gone: 08MY Discovery 3 XS, Stornoway Grey
Gone: 07MY FFRR TDV8 Vogue, Stornoway Grey
28th Sep 2012 8:38 am
macgro
Member Since: 01 Nov 2010
Location: krakow
Posts: 55
bulldocer wrote:
hello,
YES, they fit. the bullface 16x8 ET-20. I had it in 285/75/16. I dont recomend it because it is ET-20, and the original is ET54, there is 7,5 cm width each side. You wont have problems of breaking mechanic, but the suspension works worse than before.
tha best is 17" with 3 cm spacer.
I have now 33x12.5R17 and 3cm spacers and it is PERFECT!!
What The f.....k happened to The painter?
11th Oct 2012 8:49 pm
bulldocer
Member Since: 17 Jan 2010
Location: spain
Posts: 68
depends of the light. is the same color in this car
16th Oct 2012 12:14 pm
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
Just a word of warning, Bulldocers 2nd and 3rd photos show the tyres protruding further than the wheelarches, which is illegal in the UK
16th Oct 2012 1:10 pm
bulldocer
Member Since: 17 Jan 2010
Location: spain
Posts: 68
Also here. You have to homologate it and to put an extra wheelarches.
Then, after homologate, I took it off, because it doestn protrud too much... and the wheels apear in the car documentation.... is dificult to get a ticket... but not impossible. 200€. In 4 years, I havent got it..
17th Oct 2012 5:34 pm
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum