Member Since: 30 May 2012
Location: Derbyshire
Posts: 14
Common problem with door frame moulding????
Hi all
In wet and very windy Wales for weekend. Driving Discovery 3 XS down A55 at about 70 (of course), huge bang and near-side A pillar moulding had blown off, it was still trapped by bonnet but when we stopped to look it seemed the top and bottom lugs had snapped off. Is this a known issue and anybody know roughly how much to replace??
Thanks
30th Sep 2012 5:24 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Not expensive and dead easy.
Fairly common issue as some fitters skimp when replacing the screen as new clips are required when the trim is lifted off.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
About £40ish, and comes with the five or so clips.
1st Oct 2012 6:01 pm
Iftiandkate
Member Since: 30 May 2012
Location: Derbyshire
Posts: 14
Thanks for your help - picked new one up today and banged it on.
Not a good weekend for our beloved diso3 - not only did trim fly off door pillar (well nearly) but on M56 on way home we had the whole HDC not available, transmission fault, suspension lowered no parking brake fiasco - so two new brake bulbs and a new brake switch later seems ok today but perhaps won't hold my breath!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
