warrenkerrigan
Member Since: 19 Jan 2010
Location: London
Posts: 148
|
Can't Pair the FBH Remote |
|
I know this has been done quite a few times, but I am still struggling.
I have a new HSE MY2012 that comes with the timed climate / FBH active already.
I made the assumption that if that was there, all I needed was the remote (I am starting to think this my be where I was going wrong). So I spoke with TLO and he very kindly shipped me a remote.
When I press the on or off button I get 6 fast flashes of each light (red or green).
I went through the process that I found online to pair the remote. Take our fuse 2 (the 5amp) one for 1 minute. Then put the fuse back in and hold the off button on the remote.
I have done that, but I still just get the same six flashes when I press the remote and no ongoing flashes after that.
Does anyone have any ideas what I might be doing wrong?
Warren
|
23rd Sep 2012 12:12 pm |
|
|
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
|
You will need to fit the receiver, LR do not fit this unless you have the remote climate option.
|
23rd Sep 2012 12:17 pm |
|
|
warrenkerrigan
Member Since: 19 Jan 2010
Location: London
Posts: 148
|
I really must do more research before I buy these things!
|
23rd Sep 2012 12:20 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
Get in touch with Wiggs or Geoff I believe they both are selling the receivers, good news is they are dead easy to fit but I'm not sure whether they need activating but Wiggs will be able to confirm that Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
23rd Sep 2012 12:38 pm |
|
|
warrenkerrigan
Member Since: 19 Jan 2010
Location: London
Posts: 148
|
Thanks HD, I think Wiggs is going to get bored of me soon!
|
23rd Sep 2012 12:44 pm |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
You would need the module and then get it enabled
|
23rd Sep 2012 12:54 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
You need the receiver / antenna ( you already have the fob )
It will then need activating G4 Gone ...but not forgotten
|
23rd Sep 2012 1:07 pm |
|
|
warrenkerrigan
Member Since: 19 Jan 2010
Location: London
Posts: 148
|
Hi Wiggs
Is that something you can help me with?
Warren
|
24th Sep 2012 11:49 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
yes ..i will pm you G4 Gone ...but not forgotten
|
24th Sep 2012 11:51 am |
|
|