Bruce
Member Since: 22 Jun 2008
Location: Cumbria
Posts: 762
  
|
I need a replacement front nearside and a pair of rear flaps that actually come somewhere near to fitting a D4.
Anyone  If you are not part of the solution,you are part of the problem!
D4 Graphite
Ford F-150 Raptor
Audi RS6
Hymer Exsis
|
 19th Dec 2012 5:09 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
|
Try Slimer.. he was doing some very reasonable Land Rovef ones!! 
http://www.disco4.com/forum/topic48049.html Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 19th Dec 2012 5:17 pm |
|
|
Bruce
Member Since: 22 Jun 2008
Location: Cumbria
Posts: 762
|
I heard he had gone AWOL from the site, I got them from him originally.
The fronts fit fine but the rears appear to have been made to fit something other than a D4 If you are not part of the solution,you are part of the problem!
D4 Graphite
Ford F-150 Raptor
Audi RS6
Hymer Exsis
|
| 19th Dec 2012 5:43 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
|
i got a full set off him for mine... backs went on OK
them funny little brackets took some working out but went on ok.
you do have to take the wheel arch trims off too ISTR for one of lower screws Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 19th Dec 2012 9:29 pm |
|
|
