Member Since: 20 May 2007
Location: west sussex
Posts: 804
install your original software(assuming you saved it ) make sure its working ok and try another vbf fileLast night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
26th Apr 2012 6:55 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
didnt save it.. how do i save current softwares?
I only know how to save html ccf files of current settings?! - My 2006 D3 HSE PP
26th Apr 2012 10:57 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
You can't save the software... But you can save the general info from each module.
This has all the info you need to find the right software to put back on ( assuming that the software version is available )G4 Gone ...but not forgotten
26th Apr 2012 11:01 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Serial number looks currupt ... I would flash it againG4 Gone ...but not forgotten
26th Apr 2012 11:50 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
So it should have a number like the original "#7"?
I will try reflash it. Thanks - My 2006 D3 HSE PP
27th Apr 2012 12:43 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Yes .....serial number should not change .. Just the software numbersG4 Gone ...but not forgotten
27th Apr 2012 12:53 am
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
Hi Wiggs
To save the general info for ecah module, i have to do it in the menu "Maps to program ECU" before I write the vbf files to upgrade??'
Morgis
Have you reflashed the old files instead you don´t save it?
Last edited by santiD3 on 22nd Sep 2012 1:18 pm. Edited 1 time in total
27th Apr 2012 5:54 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
Found the problem
orange/red cable on the back of the light switch was half pulled out of the socket. everything is working again now - My 2006 D3 HSE PP
4th Jun 2012 10:03 pm
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
Morgis
On question, Upgraded to 8H2210849BB bodycontrol SW, What improvements do you get?
22nd Sep 2012 1:20 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
think it is for the Clock mod in instrument panel ? - My 2006 D3 HSE PP
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
- 
